UniqueKiosk · Shenzhen workshop

Moor White Fiberglass Head Form with Shoulder Bust, 900 mm

$68.00

Head form in white fiberglass with a shoulder bust on a height adjustable pole. Price range: USD 68-140, set by finish and pole set.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Head and Bust

This head form carries a head and a shoulder bust in one mould. The head reads 900 mm from base to crown. A head form with a shoulder line hides a wig base and a hat band. The face is smooth with no features, so a hat leads the eye. The neck sits at a slight angle, which reads well from a shop door. The shoulder cut is a clean line, so a scarf drops even. Retail mannequins use the same mould.

Fiberglass Build

The body is fiberglass with a white gel coat. A head form in fiberglass keeps a smooth face and no seam. The wall runs 3 mm, so the unit stays light at 2.4 kg. The coat takes a wipe and no mark from a hat band. A brush finish on the shoulder holds a soft sheen under a shop lamp. The mould is closed at the neck base, so a pole fits without a gap.

Pole and Base

A black steel pole holds this head form at 20 mm. The pole carries a height collar, so a staff member sets the head at a chosen level. A head form on a pole reads at eye level on a low table. The base is a square plate at 200 mm with a weight block. The pole comes apart in two parts for a shelf storage. A shop swaps the pole for a short one when the unit sits on a counter. A display table takes the same base.

Specification Detail
Crown Height 900 mm
Bust Head and shoulders
Body Fiberglass, 3 mm wall
Finish White gel coat
Pole Black steel, 20 mm
Base 200 mm plate
Weight 2.4 kg

Shop Use

A hat shop sets this head form on a display table. A wig shop uses two on a counter. A boutique puts one on a shelf for scarves. A bridal shop uses one for a veil line. Half body mannequins pair with this height. A shop with a low table likes the 900 mm crown, since a hat still clears a shelf above. A female mannequin stands beside it.

Build Notes

The head is moulded in one piece and left to cure for a day. A head form of this build keeps a smooth face after the demould. The shoulder edge is trimmed, then sanded by hand. The gel coat is sprayed in two passes, so no streak forms. Each unit is checked for a level base and a straight pole before packing. Read our bench notes for the mould detail.

Sizes and Price

Crown height runs at 700, 900 or 1100 mm for this head form. The finish comes in white, matte grey or a soft cream. The pole set runs at a table version or a floor version. A hat block, a wig clamp and a carry bag are options. A buyer can also order a head with no shoulders. List price starts at USD 68 for the 900 mm unit. ukiosks builds this head form in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Moor White Fiberglass Head Form with Shoulder Bust, 900 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop