UniqueKiosk · Shenzhen workshop

Marble Bakery Kiosk With Curved Cases and Wood Slat Screen

$12,600.00

Marble look bakery kiosk with stainless curved cases, two glass tiers and a wood slat back screen, sized 2.8 x 2.0 m. Price range: USD 9,000-15,000, set by size and case count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Marble Look Base

A marble look laminate wraps the base of this bakery kiosk. The sheet is 12 mm compact laminate, pressed under heat. Veins run across the panel, so seams sit at corners. A dark plinth, 60 mm high, keeps the sheet off wet floors. The base reaches 900 mm and carries the whole case load. Marble laminate weighs much less than a stone slab. It also cuts on site with a standard blade. This bakery kiosk looks built in but travels light. The food and drinks floor plate stays clear under it.

marble bakery kiosk

Stainless Curved Cases

Two stainless curved cases sit side by side on the base. Each case is 1,200 mm long with two glass tiers. The metal shell is 1.0 mm stainless, bent with no welds on the face. Shelves are 6 mm tempered glass, set level and lit from below. Trays go on the lower tier and cakes on the upper. A sliding rear door lets staff reload from inside. This bakery kiosk keeps food covered and still easy to reach. display cases with flat fronts take the same tray rails.

bakery kiosk front view

Wood Slat Screen

A vertical wood slat screen closes the back of the bakery kiosk. Slats are 30 mm wide and 40 mm deep, on 25 mm gaps. Light shows through the gaps, so the back wall never looks flat. A steel frame holds the screen at 1.1 m above the base. The frame also carries two small lit boards. Boards stay blank unless a buyer adds artwork. Storage sits behind the screen, out of aisle view. Slats are veneered and sealed against steam.

bakery kiosk case end

Build and Finishing

Carcass parts are 18 mm plywood with a moisture resistant core. Marble sheets are glued to the face, then edge trimmed. Stainless shells are formed in one bend and cleaned before packing. Glass on this bakery kiosk is tempered and boxed apart from the frames. Slats are cut, sanded and sealed twice. Every bakery kiosk is assembled once in the workshop before crating. countertop cases and cash counter parts use the same steel frame profile.

curved case bread trays

Plot and Delivery

The plan measures 2.8 m by 2.0 m, with a case top near 1.5 m. It suits plots from 10 to 14 sqm, queue strip included. Weight lands near 360 kg across four crates. Cases ship as separate boxes, so nothing rests on the glass. Site work is setting the base, then bolting cases and the screen. Two people need about one day. A 16 A circuit runs the case LEDs and the two light boards. retail display fixtures clearance rules apply at both ends.

Price and Custom Build

Stone fronts cost more than laminate, and they crack at edges. Marble laminate keeps the look at a third of the weight. Slatted backs hide stock without blocking light. List price starts at USD 12,600 for the 2.8 m build. A shorter two case bakery kiosk at 2.2 m lands near USD 10,900. ukiosks builds this bakery kiosk to order in Shenzhen. We can reset case length, slat spacing, marble tone and board count. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs fronts share the same case shell.

Specification Detail
Overall size 2.8 x 2.0 x 1.5 m (custom 2.2-3.4 m)
Base 12 mm marble look compact laminate
Cases Two stainless curved cases, 1,200 mm each
Glass 6 mm tempered shelves
Back screen 30 mm wood slats in steel frame
Lighting Case LEDs and two lit boards, 220 V
Packing Four crates, about 360 kg

Reviews

There are no reviews yet.

Be the first to review “Marble Bakery Kiosk With Curved Cases and Wood Slat Screen”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop