UniqueKiosk · Shenzhen workshop

Linden Black Slatwall Basket with Two Clips, 400 mm

$32.00

Slatwall basket in black wire mesh with two rear clip plates. Price range: USD 32-85, set by basket length and depth.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Basket and Clips

This slatwall basket runs 400 mm long and 200 mm deep. A slatwall basket of this size holds a folded stack or a boxed line. The rim stands 100 mm tall, so a pack stays inside. Two clip plates hook into a 60 mm slat on a 25 mm pitch wall. The base sits flat, so a basket takes a load without a sag. A basket holds 6 kg across the mesh floor. A retail display wall uses this clip.

Mesh Build

The body is 4 mm wire mesh with a black powder coat. A slatwall basket in this mesh lets a shopper see the stock. The rim runs a double wire, so the mouth stays stiff. The clip plates are 1.5 mm steel, so a basket stays level under load. The base carries a centre rib, so a heavy pack does not bell. A dry cloth clears a dust line from the rim.

Wall Set

A slatwall basket of this depth sets 200 mm off the wall. A shop sets a row at 1500 mm for a reach line and 1200 mm for a promo line. The clips must sit in the same slat row, so a run reads level. A staff mounts a basket in about twenty seconds. A basket lifts off by hand, so a reset takes no tool. A label strip sits on the front rim as an option. Our store fixture run shares this slat.

Specification Detail
Length 400 mm
Depth 200 mm
Rim 100 mm
Mesh 4 mm wire
Slat 60 mm
Load 6 kg
Weight 1.6 kg

Shop Use

A boutique sets this slatwall basket on a wall run. A hardware shop uses a row for fixings. A pet shop uses one for treat packs. A trade show uses a row at a booth wall. Shelving of this build pairs with a slatwall panel. A panel of 1200 mm holds three baskets at this pitch. A wire grid display panel takes the same basket.

Build Notes

The mesh is welded on a jig, then cut to size. A slatwall basket of this build keeps a square rim after a move. The clip plates are stamped, then welded to the back wall. The frame is phosphated before the black coat. Each unit is checked for a level base and a true clip before packing. Read our bench notes for the clip weld.

Sizes and Price

Length runs at 300, 400 or 500 mm for this slatwall basket. The depth runs at 150, 200 or 250 mm. The finish comes in black, white or chrome. The clip comes at 60 mm or 75 mm slat. A label strip, a divider and a liner are options. List price starts at USD 32 for the 400 mm basket. ukiosks builds this slatwall basket in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Linden Black Slatwall Basket with Two Clips, 400 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop