UniqueKiosk · Shenzhen workshop
LED Cart in Yellow With Strip Lights and Counter
$2,700.00
Yellow food cart with LED strip lighting on a peaked roof frame, a blank light disc and a fold-down shelf, sized 1.6 x 1.0 m. Price range: USD 2,000-6,600, set by size and light count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
LED Roof Frame
A peaked roof frame outlines this food cart in LED strip. The frame is 20 mm steel tube with a white strip clipped along the edge. The peak sits at 2.0 m, with a flat panel at the centre. Strips run at 12 V off a small driver inside the body. Colour is warm white, close to 3000 K. Light reads from 40 m on a dark street. This food cart stays visible after dusk without a printed sign. Every food cart we light uses the same sealed channel.
Yellow Striped Body
Yellow and black stripe panels face this food cart. Panels are 1.0 mm aluminium with a coated print, cut into 120 mm strips. Strips sit behind a clear seal, so edges stay sharp. A round light disc sits at the front centre, 400 mm across. The disc face is blank white and lit from behind. A fold-down shelf runs on both sides at 900 mm. display cases glass can cover the open bay if a shop needs a case.
Counter and Wheels
The counter of this food cart runs 1.6 m at 950 mm height. A stainless top sits over a ply core with folded edges. Two spoked wheels carry the rear, with two small castors at the front. Wheels are 400 mm with steel rims, painted black. A push bar sits at the back for one person to move it. Body weight lands near 120 kg empty. This food cart fits a 1.8 m market bay. cash counter counters use the same wheel set.
Build and Finish
Frame tubes are cut on a saw and welded on a jig. LED channels are glued and sealed before wiring. Print panels are laminated and trimmed, then fitted with a gasket. Drivers are mounted in a vented box. Every food cart is powered up for two hours on test before crating. Strips are rated for 30,000 hours. countertop cases cases fit the counter top. coffee fit-outs fit outs share the driver box.
Use on Site
Setup takes one person about 20 minutes. Push the cart in, brake the castors, plug the driver into a 16 A supply. The footprint is 1.6 m by 1.0 m with shelves up. Strips draw about 60 W across the frame. A battery pack lasts a full evening if a pitch has no power. Clean down is a cloth and a glass wipe. retail display fixtures rules keep a gap at the wheels. This food cart suits a night market lane.
Price and Custom Build
A lit frame pulls buyers from the far end of a dark lane. Stripe panels read as a brand block without a printed sign. A lit disc gives one clean spot for a logo later. List price starts at USD 2,700 with strips and the disc. A plain cart without lighting lands near USD 2,000. ukiosks builds this food cart to order in Shenzhen. We can reset body length, strip colour, disc size and roof pitch. Send your plan and we return drawings and a quote. Nearby food and drinks kiosks and countertop cases cases share the same frame.
| Specification | Detail |
|---|---|
| Overall size | 1.6 x 1.0 x 2.0 m (custom 1.4-2.2 m) |
| Frame | 20 mm steel tube, welded |
| Body | 1.0 mm aluminium with printed strips |
| Lighting | 12 V LED strip, 3000 K, about 60 W |
| Disc | 400 mm backlit white panel |
| Wheels | Two 400 mm spoked wheels, two castors |
| Packing | One crate, about 120 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.