UniqueKiosk · Shenzhen workshop

Lark Black Metal Floor Display Rack with Hooks, 1600 mm

$150.00

Floor display rack in black steel with a pegboard panel, blank header board and five hooks. Price range: USD 150-360, set by panel size and hook count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Panel and Header

This display rack runs 1600 mm tall on a 400 mm base plate. A display rack of this size holds a small line on one panel. The pegboard face carries a 6 mm hole grid at 25 mm pitch, so a hook moves in a minute. The header board runs 350 mm high, so a price line reads above the goods. Five chrome hooks sit on the face. The base takes a 200 mm depth. A retail display plan sets the hook rows.

Steel Build

The frame is 1.2 mm steel with a black satin powder coat. A display rack in this build takes a full hook of phones without a lean. The panel bends at the edge, so it meets a post clean. The base welds on a jig, so a post stands upright. The hooks screw into the grid, so a hook holds 5 kg. A dry cloth clears a print from the panel.

Floor Set

A display rack of this build sets in about eight minutes with one tool. A staff stands the base, then bolts the panel frame in one go. The hooks fit at any grid point, so a staff sets a row for phones and a row for cases. The rack stands alone or in a run of three, so a wall reads even. The base keeps a rack steady at a walkway. A rack fits a van in one piece. Our store fixture crew packs this stand.

Specification Detail
Height 1600 mm
Base 400 mm
Hooks 5
Grid 6 mm at 25 mm
Header 350 mm
Steel 1.2 mm
Finish Black satin

Store Use

A phone shop uses this display rack at an entrance. A gift shop uses one for a small line. A craft fair uses one as a booth stand. A supermarket uses one for a hanging run. Countertop displays of this build sit on a till point. A bay of 600 mm takes one rack with a clear walk. A wall fixture takes the back stock.

Build Notes

The sheet cuts on a laser, then punches on a press for the hole grid. A display rack of this build keeps a straight panel after a move. The frame welds on a jig, so a corner reads tight. The coat bakes at 200 C, so a panel resists a trolley knock. Each lot is checked for a level base and a firm hook before packing. Read our bench notes for the grid check.

Sizes and Price

Height runs at 1300, 1600 or 1800 mm for this display rack. The panel width runs at 400 or 500 mm. The hooks run at five, ten or fifteen. The finish comes black, white or grey. A shelf, a header print and a wheel set are options. List price starts at USD 150 for the 1600 mm rack. ukiosks builds this display rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Lark Black Metal Floor Display Rack with Hooks, 1600 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop