UniqueKiosk · Shenzhen workshop
Koda Black Velvet Ring Box with Ring Slot, 55 mm
$45.00
Jewellery box in black velvet with a padded ring slot and a hinged lid. Price range: USD 45-120, set by size and insert type.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Ring Slot Insert
This jewellery box measures 55 mm square and 40 mm tall. A jewellery box of this size holds one ring on a padded slot. The slot runs 25 mm wide, so a band seats below the crown. The insert is foam wrapped in the same velvet, so no white edge shows. A lid closes on the rim, so the ring stays put in a bag. A shop opens the box flat for a customer to see the stone. A counter display holds this box.
Velvet Cover
The outer face is black velvet over a paper board shell. A jewellery box in this cover keeps a soft edge under a lamp. The velvet is glued and pressed at the corner, so the corner reads round. The board runs 2 mm, so the box holds its shape. A hinge strip joins the lid and the base. A soft brush clears the dust from the velvet pile.
Shop Use
A jeweller sets this jewellery box on a tray beside a ring line. A bridal studio uses one for a proposal set. A pawn shop uses one for a handover. A duty free counter uses them in a row. Jewellery displays of this build pair with a ring tray. A counter of 300 mm holds three boxes side by side. Our retail display set uses this tray.
| Specification | Detail |
|---|---|
| Size | 55 mm square |
| Height | 40 mm |
| Slot | 25 mm |
| Cover | Black velvet |
| Shell | 2 mm board |
| Insert | Foam ring slot |
| Weight | 0.1 kg |
Stamping Option
A shop may add a foil mark on the lid at 30 mm wide. This jewellery box takes a hot stamp in gold or silver. The mark sits on the velvet face, so it reads flat. A logo die is quoted once, then reused. A small order runs from 50 units with one mark. A shop keeps the mark clear of the ring slot. A store fixture order ships with these.
Build Notes
The board is cut on a die press, so each shell matches in size. A jewellery box of this build keeps a square corner after a move. The velvet is cut on a table with a blade, then pressed at the edge. The insert is moulded to the ring width. Each unit is checked for a flat lid and a firm hinge before packing. Read our bench notes for the insert detail.
Sizes and Price
Size runs at 45, 55 or 70 mm square for this jewellery box. Height runs at 35 or 40 mm. The insert comes for a ring, a pair of earrings or a pendant. The cover comes in black, navy or ivory velvet. A dust bag, a sleeve and a foil mark are options. List price starts at USD 45 for the 55 mm unit. ukiosks builds this jewellery box in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.