UniqueKiosk · Shenzhen workshop
Kiln Walnut Pedestal Vitrine with Glass Hood and Door
$780.00
Walnut pedestal vitrine with a white deck, clear glass hood and a lockable door. Price range: USD 780-1,150, set by finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Case Profile
This pedestal vitrine stands 1100 mm tall on a 450 mm square base. The glass hood adds 400 mm of clear space above the deck. A shop sets one piece inside and the hood keeps hands off. A pedestal vitrine at this height reads at eye level from a standing customer. The base carries a door, so a shop can store a spare piece inside. A white deck lifts the product off the walnut and keeps the case bright. Jewellery displays list this hood size.
Glass Hood
The hood uses 6 mm tempered glass on four sides with a clear low iron edge. A slim aluminium cap holds the top, so the glass line stays thin. The hood sits on the deck and can be lifted off for cleaning. A shop places a necklace bust inside and the glass cuts glare from the shop light. A pedestal vitrine with a clear hood also shows a watch from both sides. The glass edge is polished and the corner joint is bonded, so no sharp fillet shows. A shop also fits a ring tray on the deck. Countertop displays use this deck size.
Base and Door
A walnut veneer body carries the deck of this pedestal vitrine. The face door runs 380 mm wide and takes a cam lock. Inside sits one shelf at mid height for a box or a document set. A powder coated steel frame wraps the base edge and frames the veneer. The plinth sits 20 mm off the floor and takes a brass strip. A shop stores stock inside a pedestal vitrine, so the deck stays clear for the hero piece. A spare box fits behind the shelf stop as well. Display cases share this door height.
Bench Build
The body is 18 mm plywood with a walnut veneer and a matte lacquer. The deck is a 25 mm panel with a white laminate face. Steel work is welded and ground, then powder coated in warm grey. The hood glass is bonded at the corners and capped on top. Each pedestal vitrine leaves the bench after a check on the plinth and a check on the glass line. A case with a bent deck would show a gap under the hood, so the deck is measured twice. Read about our bench process for the detail.
Retail Use
Jewellers place this pedestal vitrine in a row behind a counter. A museum shop uses one for a single object under glass. A watch shop sets a cushion on the deck and turns the case to catch the light. A bridal shop puts a tiara inside and keeps the veil on a rail beside it. Store fixtures pair with this base height. A shop with a narrow aisle likes the square footprint, since the case takes little floor.
Sizes and Price
Deck size runs at 400 mm, 450 mm or 500 mm square. Height runs at 1000 mm or 1100 mm. Hood height runs at 350 mm or 400 mm. The deck comes in white, light grey or a mirror finish. A lock, an LED puck light and a hinged hood are options. The veneer comes in walnut, oak or a plain laminate. List price starts at USD 780 for the 450 mm unit. ukiosks builds this pedestal vitrine in Shenzhen to order, so send your spec through contact us.
| Specification | Detail |
|---|---|
| Deck Size | 450 x 450 mm |
| Height | 1100 mm |
| Hood | 400 mm, 6 mm tempered glass |
| Body | Walnut veneer, 18 mm plywood |
| Door | 380 mm with cam lock |
| Plinth | 20 mm with brass strip |
| Load | 12 kg on the deck |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.