UniqueKiosk · Shenzhen workshop

Juice Bar Kiosk in Orange and White With Mesh Sign Frame

$11,800.00

Orange and white juice bar kiosk with mesh sign header, stainless work top and separate cash counter, sized 3.0 x 1.6 m for mall and food hall sites. Price range: USD 9,000-15,000, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Frame and Sign Panel

A juice kiosk in orange and white starts with the frame. Square steel tubes carry a diamond mesh header panel. The mesh hides the lamps above and keeps the sign area open. Orange panels wrap the rear service wall. White counter panels sit below the work top. Three sides stay open for serving. One narrow side hides the sink run and stock. Panels lift off for access to pumps and filters.

orange juice bar kiosk

Counter and Work Zone

The main counter runs about 3 m along the front. A front-loading citrus juicer sits at the left end. Two glass juice dispensers stand next to it. A small sink and drainer fill the right run. A separate cash counter sits at the far right. Cups and lids go below in open bays. Every juice kiosk needs this split zone: wet work on one side, dry stock on the other. Countertop cases can replace one dispenser bay if you sell cut fruit.

juice kiosk front view

Finishes and Construction

Bodies are built from 18 mm MDF with a laminate face. Laminate takes the humidity of a juice bar well. Steel tubes get a powder coat, not a paint finish. Glass display cases guards are 5 mm tempered and clipped in. LED strips run under the header and along the toe line. Edges are banded before assembly, not after. A juice kiosk is fitted in the workshop before packing. The mesh header bolts on last, once the frame is level. Packing follows a fixed order for every juice kiosk.

juice kiosk side view

Where the Unit Fits

Malls, airports and food halls all take this shape. A food and drinks zone needs a low front counter, so passers-by see the work. Gyms and campuses use the same footprint for smoothies. The open L leaves a serving gap of about 1 m. Two staff can work inside without blocking the aisle. Service comes from the front, restock from the side. This juice kiosk suits plots from 9 to 14 sqm.

juice kiosk counter detail

Sizes and Delivery

Standard builds run from 2.5 m to 3.5 m in length. Depth sits at 1.6 m and height stops at 2.3 m. Weight is about 260 kg, packed in two crates. A juice kiosk ships upright, with each section marked. Site work is bolting sections, then joining the LED looms. A crew of two needs about one day. Ask for the drawing set before you order. Small changes in length rarely change the price band. Service counters follow the same packing rule.

Cost and Custom Options

Orange and white is the loud option, and mall operators like it. The mesh header keeps the unit visible from 30 m away. Cleaning takes minutes, since the panels are flat. A juice kiosk with flat panels is easier to keep clean. List price starts at USD 11,800 for the 3.0 m build. ukiosks makes this juice kiosk to order in Shenzhen. We can reset colors, counter length, dispenser count and sign size. Send a floor plan and we return sections, drawings and a quote. Related retail display fixtures and coffee and food fit-outs share the same frame system.

Specification Detail
Overall size 3.0 x 1.6 x 2.3 m (custom lengths 2.5-3.5 m)
Body material 18 mm MDF with laminate face
Frame Powder-coated square steel tube
Header Diamond mesh panel with LED strip
Glass 5 mm tempered glass guards
Work top Stainless steel, 1.2 mm
Packing Two crates, about 260 kg

Reviews

There are no reviews yet.

Be the first to review “Juice Bar Kiosk in Orange and White With Mesh Sign Frame”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop