UniqueKiosk · Shenzhen workshop

Illuminated Countertop Display Case With Walnut Plinth

$480.00

Countertop display case with tempered glass sides, two glass shelves, a warm LED strip and a walnut plinth, 600 x 400 x 550 mm. Price range: USD 300-600, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Lit Glass Case

A lit glass case puts a warm line of light on a counter. This countertop display case is 600 mm wide, 400 mm deep and 550 mm tall. Glass is 6 mm tempered, so a knock does not break it into sharp pieces. A strip runs under the top panel at 3000 K. Light faces down, so the top shelf gets a clean glow with no glare at eye level. Output is about 8 W for the run. The countertop cases range adds a 900 mm version with two strips.

illuminated countertop display case

Two Shelf Levels

Two shelves divide this countertop display case into three levels. Shelves are 6 mm tempered glass with a polished edge, rated 10 kg. Each one rests on four small metal studs glued to the side panels. Height is set at build, at 180 mm and 360 mm from the deck. A shopper reads the top level first, then the middle, then the deck. The deck is a dark panel, so a bright item stands out. display cases cases use the same studs.

countertop case front view

Walnut Plinth

A walnut plinth lifts this countertop display case off the counter. The plinth is 80 mm tall with a plain square edge and a matte clear coat. It carries the light driver and the lead, so no cable crosses the glass. A small switch sits at the rear with a 1.8 m cable. Feet are four pads that take a 10 mm shim. Wood tone stays even under shop spot lights. Every countertop display case we build gets a light test before crating. This countertop display case ships with clear fitting notes.

countertop case side view

Build and Glass

Tempered panels are cut to order and packed with a card between sheets. Corners are joined with a clear silicone bead and a small metal cap at the top. The plinth is board with a walnut veneer face, edged and sealed. Every countertop display case is checked for square and for cable routing. Packing is one carton with the glass in a sleeve. retail display fixtures crews set the shelves last.

LED strip and plinth detail

Where It Stands

This countertop display case suits a watch bar, a cosmetics desk and a hotel shop. A 600 mm footprint fits between a till and a bag stand. Height at 550 mm puts the top shelf at standing chest level. The lit strip makes a dial or a bottle read in a dim corner. Three levels fit three price bands in under a metre. Many cash counter counters use one at the end. The shop fit outs package adds a second case for cards.

Price and Custom Build

A lit case sells a small piece that a shopper would otherwise miss. Tempered glass takes daily handling in a busy shop. A walnut plinth hides the driver and the cable. List price starts at USD 480 for the 600 mm unit. A 900 mm build with two light strips lands near USD 640. ukiosks builds this countertop display case to order in Shenzhen. We can reset length, shelf count, light colour and plinth timber. Send your plan and we return drawings and a quote. Many food and drink shops order two.

Specification Detail
Overall size 600 x 400 x 550 mm (custom 400-900 mm)
Glass 6 mm tempered panels and shelves
Shelves Two shelves, 10 kg each
Lighting LED strip at 3000 K, about 8 W
Plinth 80 mm walnut veneer base
Switch Rear switch with 1.8 m cable
Packing One carton, about 26 kg

Reviews

There are no reviews yet.

Be the first to review “Illuminated Countertop Display Case With Walnut Plinth”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop