UniqueKiosk · Shenzhen workshop

Hutch Wall Mounted Display Case with Shelves and Drawer Base

$980.00

Wall mounted display case with four open shelves, a slat back panel and a drawer base cabinet. Price range: USD 980-1,380, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Upper Shelf Hutch

Four open shelves sit in the upper hutch of this display case. Each shelf runs 900 mm wide on a 350 mm pitch and takes a 25 mm board. A shop sets a tall bottle on the top shelf and a boxed set below. The hutch sides also close the ends, so a stack cannot slide off. Display cases list this shelf pitch. A deep hutch also hides a rear cable run behind the slat back.

wall display hutch

Slat Back Panel

A slatwall panel fills the back of this display case. The grooves sit on a 100 mm pitch and take a hook, a clip or a small bracket. A shop hangs a carded line behind each shelf and gains a second display layer. The panel also lets a staff member move a hook without a drill. Display shelves use this groove pitch. A pale slat also lifts a dark product line.

hutch front view

Base Cabinet

A base cabinet closes the bottom of this display case at 700 mm high. The cabinet holds one wide drawer on a soft close slide and one open bay behind it. A shop keeps the spare stock and the wrapping paper inside the bay of this display case. A deep bay also hides a boxed line from view. The drawer front also takes a label plate for a stock count. Retail displays fixtures share this cabinet line.

hutch side view

Shop Use

This display case fits a wall bay in a small shop, a salon back wall or a hotel suite. The unit mounts to the wall with a hidden rail, so no leg sits on the floor. A shop sets the base at 700 mm and keeps the hutch top at 2200 mm. A matte black finish also reads quiet under a warm spot. Display racks fit the same bay.

Load and Care

Each shelf of this display case holds 20 kg across a 900 mm span. Fix the unit to wall studs, since a plaster board alone will not carry a loaded hutch. A loaded shelf stays level within 2 mm when the wall rail sits true. Wipe the finish with a dry cloth and keep the slat grooves dust free. Check the wall bolts after a month, since a loose bolt lets the hutch hum. Read more about our bench on our wall units.

drawer front detail

Size Options

Width runs at 900 mm or 1200 mm on request. Total height runs at 2200 mm or 2400 mm. A shop can order glass shelves in the hutch, or two drawers in place of one. The finish comes in matte black, satin white or walnut veneer. List price starts at USD 980 for the 900 mm unit. ukiosks builds this display case in Shenzhen to order, so send your wall survey through contact us.

Specification Detail
Width 900 mm
Total height 2200 mm
Hutch depth 300 mm
Shelves 4 open
Back Slatwall panel
Base Drawer and open bay
Load 20 kg per shelf

Reviews

There are no reviews yet.

Be the first to review “Hutch Wall Mounted Display Case with Shelves and Drawer Base”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop