UniqueKiosk · Shenzhen workshop
Glen Nickel Glass Case Cam Lock Kit, 30 mm
$32.00
Cam lock kit in nickel plated zinc with two keys and a cam bar, made for glass showcase doors. Price range: USD 32-78, set by cylinder length and key count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Lock and Cam
This cam lock runs a 30 mm cylinder in a 60 mm plate. A cam lock of this length grips a 6 mm glass door and a 12 mm frame. The cylinder turns 90 degrees, so a key clears the cam bar in one motion. The cam bar angles 45 degrees, so a door pulls tight. The plate carries two screw holes, so a fit needs no bracket. A lock ships with two keys and a key code. A retail display case takes this lock.
Zinc Build
The body is die cast zinc with a nickel plate. A cam lock in this metal resists a twist from a lever. The cylinder pins run five columns, so a key differs from the next. The plate edges are deburred, so a hand stays clear during a fit. The cam bar is 2 mm steel, so a bar holds a pull. A dry cloth clears a mark from the plate.
Case Fit
A cam lock of this size fits a showcase door of 6 to 8 mm glass. A staff drills a 19 mm hole, then sets the lock in about ten minutes. The cam bar turns inside the case, so a door seals against a rubber strip. A key code stays on file, so a shop orders a spare. A lock works on a sliding door or a swing door. A ring light bar in the case pairs with this kit. Our store fixture cases share the hole size.
| Specification | Detail |
|---|---|
| Cylinder | 30 mm |
| Plate | 60 mm |
| Glass | 6-8 mm |
| Turn | 90 deg |
| Keys | Two |
| Finish | Nickel |
| Weight | 95 g |
Shop Use
A jewelry shop fits this cam lock to a glass showcase. A museum uses it on a display case. A chemist uses it on a locked cabinet. A trade show uses it on a sample case. Jewelry displays of this build take the same hole. A case of 1200 mm needs two locks for a full seal. A countertop display fits one lock.
Build Notes
The body casts in a die, then tumbles for a smooth face. A cam lock of this build keeps a free turn after a year. The pins set on a key machine, so a code stays true. The plate plates in a nickel bath, then dries in a rack. Each lot is checked for a free turn and a clean key before packing. Read our bench notes for the pin set.
Sizes and Price
Cylinder length runs at 20, 30 or 40 mm for this cam lock. The plate comes square or round. The finish comes in nickel, chrome or brass. The kit runs with two or four keys. A spare cam bar, a drill guide and a light bar are options. List price starts at USD 32 for the 30 mm kit. ukiosks builds this cam lock kit in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.