UniqueKiosk · Shenzhen workshop

Full Vision Glass Showcase Counter With LED Base

$1,250.00

Wide glass display case at counter height with three shelves, a lit base band and a front lock, sized 1.8 x 0.5 x 0.95 m. Price range: USD 300-1,500, set by width and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Counter Height Case

A counter-height case puts goods at a shopper hand line. This glass display case is 1,800 mm wide, 500 mm deep and 950 mm tall. The case body is all glass on the front, sides and top. A black board deck forms the floor inside, and a lit band runs under it. The frame is slim, so the glass line reads clean from the aisle. A shopper sees the top shelf without bending. This shape suits an impulse bay at a till. The display cases range includes a taller 1.6 m tower.

full vision showcase counter

Shelves and Access

Three shelves divide this glass display case into four levels. Shelves are 6 mm glass on black brackets, rated 10 kg. Bracket slots run every 30 mm, so a shop can set level gaps for its own stock. Two sliding glass doors open at the front with a cam lock. The rear is glass too, so goods read from behind a till. Every glass display case we build uses the same bracket slot spacing. Loading runs top shelf down to keep the deck clear.

showcase counter front view

Lit Base Band

A lit band under the deck makes this glass display case glow at floor level. The band is 60 mm tall with a 24 V strip at 3000 K. Light faces down, so the glow lands on the floor and lifts the case off its shadow. Output is about 14 W per metre. A small driver sits in the base with a switch. The band face is a frosted panel, so single LEDs do not read. countertop cases cases share the same strip. Shop floors in stone show the effect best.

showcase counter side view

Frame and Build

Black steel posts hold the glass in this glass display case. Posts are 20 mm square tube with a matte coat. Glass edges sit in a gasket, and the top cap is a slim black plate. Deck board is 18 mm with a black laminate face. The case sits on four levelling feet with a 20 mm range. Frames are welded on a jig first, then coated. Every glass display case gets a light soak test before packing. retail display fixtures crews fit the band last.

lit base band detail

Shop Placement

This glass display case suits a till bay, a window and a mall corridor. A 1.8 m run leaves 1.2 m for a queue lane. Height at 950 mm works as a service top too, with a card reader on the glass. Two units back to back serve two aisles at once. Power comes from one 16 A socket per two units. Labels sit inside on the deck, so the front stays clear. Many cash counter stations place one case beside the till. The shop fit outs package adds a low bench.

Price and Custom Build

A lit base lifts a low case off a dark floor without extra lamps. All-glass sides let a shopper see stock before asking a price. A counter height keeps staff and shopper at one level. List price starts at USD 1,250 for the 1.8 m unit. A 1.2 m build without the band lands near USD 820. ukiosks builds this glass display case to order in Shenzhen. We can reset width, depth, shelf count and base light colour. Send your plan and we return drawings and a quote. Nearby food and drink shops counters use the same frame.

Specification Detail
Overall size 1.8 x 0.5 x 0.95 m (custom 1.2-2.4 m)
Glass 6 mm clear, polished edges
Shelves Three glass shelves, 10 kg each
Frame 20 mm black steel posts
Base light 24 V LED band at 3000 K, 14 W/m
Deck 18 mm board with black laminate
Packing One crate, about 110 kg

Reviews

There are no reviews yet.

Be the first to review “Full Vision Glass Showcase Counter With LED Base”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop