UniqueKiosk · Shenzhen workshop

Four Panel Curved Menu Light Box Set

$690.00

Four panel curved light box set for menu walls, 1600 mm total run with 400 x 300 mm faces and a black steel frame. Price range: USD 600-900, set by panel count and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Four Panel Row

A row of panels covers a long menu wall in one run. This light box set joins four curved faces, each 400 x 300 mm. Total run is 1600 mm with a 30 mm joint between panels. Each face is a shallow curve, so a shopper reads it from the side of a queue. A black steel frame wraps the whole run and holds the joints. Height sits at 300 mm, well under a counter height. The set weighs about 14 kg. The countertop cases wall range adds a three panel build.

four panel curved light box

Curved Face Light

A curved face spreads light with no flat hot spot. Each panel in this light box carries its own strip behind the diffuser. The curve runs 25 mm deep at the centre and meets the frame at the edge. Brightness holds near 950 lux across the face. Colour sits at 3000 K, so food photos keep a warm tone. Each panel takes a separate print, so one price can change without a new run. The faces array as one lit band from a distance. Every light box we ship gets a brightness check, and display cases crews add a spare strip.

menu light box set front view

Joint And Frame

A narrow joint keeps this light box set readable as one band. Each joint is a steel strip with a small hinge, so the run can bend to a shallow wall curve. The frame is 40 mm steel with a matte black powder coat. A back rail carries four hooks for a wall or a ceiling fix. The run can be split into two pairs for a corner. A single driver feeds all four panels through one lead. retail display fixtures teams set the joints before fixing the rail. This light box ships with clear fitting notes.

curved light box set side view

Build And Print

Panels for this light box are formed on a curved mould, then trimmed to size. A clear acrylic sheet sits over each print, cut to the panel curve. Prints mount on a stiff card, so the sheet stays flat along the curve. Each panel has its own access slot at the top. A staff member swaps one face in about a minute. A spare joint strip and two hooks ship in the carton. Packing is two cartons with foam cradles. cash counter desks keep one panel spare.

panel joint strip detail

Menu Wall Uses

This light box set suits a quick service counter, a food hall and a cinema foyer. A 1600 mm run carries four price columns at one glance. The curved faces read from an angle, so a queue on the left still sees the right column. A wall fix keeps the run above head height and off the counter. A single lead means one socket for the whole band. The set can run one face for a promo and three for prices. Many shop fit outs mount one above a pass. food and drink shops halls use two.

Price And Custom Build

List price starts at USD 690 for this four panel set. A six panel run with a longer rail lands near USD 900. A panel row turns a long wall into one lit price band. A curved face reads from the side of a queue. One lead feeds the whole run with no extra sockets. ukiosks builds this light box set to order in Shenzhen. We can reset panel count, curve depth, frame colour and joint hinge. Send your plan and we return drawings and a quote.

Specification Detail
Run length 1600 mm, four panels
Panel face 400 x 300 mm each, 25 mm curve
Frame 40 mm matte black steel
Joint Steel strip with hinge, 30 mm
Light Per panel LED, about 950 lux at 3000 K
Fix Wall or ceiling hooks on a back rail
Weight About 14 kg

Reviews

There are no reviews yet.

Be the first to review “Four Panel Curved Menu Light Box Set”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop