UniqueKiosk · Shenzhen workshop
Fluted Beverage Counter With Brass Framed Glass Case
$2,400.00
Fluted slat beverage counter with a marble look top, brass framed glass display case and blank sign holder, sized 2.2 x 0.6 m for cafe and juice bar fronts. Price range: USD 600-2,500, set by size and case count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Fluted Slat Base
Vertical wood slats form the base of this juice kiosk counter. Each slat is 40 mm wide with a 12 mm gap, so shadow lines show. Slats sit on a plywood carcass and stop at a brass kick rail. The kick rail keeps mops off the timber. Two end panels close the run in plain wood. Slats are sealed twice against spills. A 2.2 m run needs about 34 slats, cut from one board batch. Small units like this suit a food and drinks corner or a cafe front.
Marble Look Counter Top
The top uses a 12 mm marble look compact laminate. It reads like stone but weighs a fraction of a slab. Edges are trimmed with a 20 mm band in the same finish. A work strip of 400 mm runs behind the front edge. The top carries a brass sign holder on the left side. Cups and lids sit on the right, within arm reach. This juice kiosk counter takes hot cups without ring marks. Wet cloths wipe it clean in one pass.
Brass Framed Glass Case
A brass framed glass case sits on the right half of the top. The case measures 900 mm by 450 mm and 400 mm tall. Two glass shelves hold pastry trays at two levels. Frames are brass plated steel, not solid brass. Glass is 5 mm tempered and set in a brass channel. Front and back panels are fixed, with no door on this case. Every juice kiosk display case we build uses the same channel. display cases in larger sizes take the same shelf pins.
Build and Finishing
The carcass is 18 mm ply with a moisture resistant core. Slats are cut, sanded and sealed before assembly. Brass parts are plated, then cleared to stop tarnish. Glass arrives boxed and is fitted on site or in the shop. Legs sit under the run, hidden by the kick rail. A juice kiosk counter this size ships as one crate, about 90 kg. countertop cases cases can be added on the same top. Assembly checks on every juice kiosk counter happen before the crate is closed.
Where It Fits
The unit measures 2.2 m by 0.6 m, with a top height of 950 mm. It suits cafe fronts, juice bar corners and hotel lobby counters. The narrow depth leaves 1.4 m of aisle behind. One staff member serves from the back face. A second run can sit at right angles to form an L. Brass and fluted wood read well under warm spot lights. A juice kiosk counter of this depth fits small plots. cash counter drawers can replace the left slat bay.
Price and Custom Build
Fluted bases cost more labour than flat panels, and they show less wear. Brass frames lift a plain counter into a premium look. The marble top hides stains that white tops keep. List price starts at USD 2,400 for the 2.2 m run. A shorter juice kiosk counter at 1.6 m lands near USD 1,800. ukiosks builds this juice kiosk counter to order in Shenzhen. We can reset run length, slat width, case size and kick rail finish. Send your plan and we return drawings and a quote. retail display fixtures counters and coffee fit-outs fronts share the same carcass.
| Specification | Detail |
|---|---|
| Overall size | 2.2 x 0.6 x 0.95 m (custom 1.6-2.8 m) |
| Base | 40 mm wood slats on 18 mm plywood |
| Counter top | 12 mm marble look laminate |
| Display case | Brass frame, two glass shelves, 5 mm glass |
| Kick rail | Brass plated steel, 80 mm |
| Sign holder | Brass, blank card slot |
| Packing | One crate, about 90 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.