UniqueKiosk · Shenzhen workshop

Felix Oak Necklace Display Stand with Three Boards, 450 mm

$95.00

Jewellery display in oak with three slanted velvet boards and a folded base. Price range: USD 95-220, set by board count and size.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Boards and Slant

This jewellery display stands 450 mm tall on a 400 mm width. A jewellery display with three slanted boards shows about 60 necklaces in one view. Each board leans at 20 degrees, so a pendant hangs free. The board face is black velvet at 3 mm over a board core. A board gap runs 90 mm, so a long pendant clears the row below. A shop reads all three rows from one step. A jewellery counter set uses this board.

Oak Frame

The side panels are 18 mm oak with a clear matte coat. A jewellery display in this wood shows the grain at the edge. The panels are cut on a saw with a stop, so the pair matches. The boards sit in a groove at each side, so no screw shows at the face. A base rail joins the panels at the floor. A dry cloth clears dust between necklaces.

Counter Fit

The base folds to a 400 mm footprint. A jewellery display of this size fits a counter with 450 mm of depth. The stand leans back 5 degrees, so it does not tip on a light push. A shop sets it beside a ring tray and a mirror. The top board runs at 450 mm, so a customer reads the first row while standing. A card tag sits on the base edge. Our bracelet display shares the base.

Specification Detail
Height 450 mm
Width 400 mm
Boards Three, 20 deg
Velvet 3 mm black
Board Gap 90 mm
Panel 18 mm oak
Weight 6 kg

Boutique and Fair

A boutique sets this jewellery display on a glass counter. A craft fair uses one on a table. A bridal shop uses one for a loan line. A department store uses two side by side. Jewellery displays of this build pair with a ring tray. A counter of 500 mm holds the base with room for a card stand. A counter organizer sits beside it.

Build Notes

The oak is sanded to 180 grit, then coated with a matte clear. A jewellery display of this build keeps a flat panel after a move. The velvet is glued and pressed at the board edge. The groove is cut on a router with a guide, so each board sits level. Each unit is checked for a level board and a firm joint before packing. Read our bench notes for the grain detail.

Sizes and Price

Height runs at 350, 450 or 550 mm for this jewellery display. Board count runs at two, three or four. Width runs at 300 or 400 mm. The finish comes in oak, walnut or a black stain. A ring tray, a card stand and a dust bag are options. List price starts at USD 95 for the 450 mm unit. ukiosks builds this jewellery display in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Felix Oak Necklace Display Stand with Three Boards, 450 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop