UniqueKiosk · Shenzhen workshop
Espresso Kiosk in Black Fluted Finish With Two Glass Cases
$11,500.00
Dark fluted espresso kiosk with two curved glass food cases, wood work top and mesh canopy, sized 3.0 x 2.0 m for mall and transit sites. Price range: USD 9,000-15,000, set by size and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Body and Frame Build
Dark cabinets set the tone for this espresso kiosk. The body uses 18 mm plywood with a black fluted laminate face. Vertical ribs give the base a fine rhythm along the front. A black steel frame rises from the counter to a perforated mesh canopy. The mesh hides the ceiling and shades the lamps. Light wood tops break the dark mass at counter height. Every edge is trimmed in the same steel profile. Nothing in this coffee kiosk looks pieced together.
Twin Glass Display Cases
Two curved glass cases sit at the front corners. Each case carries four glass shelves inside. The left case takes pastries and the right case takes cold items. Both open from the staff side, so restocking stays inside the coffee kiosk. Tempered glass keeps the food visible from both aisles. A wood serving shelf links the two cases. This coffee kiosk sells food and drinks from one footprint. Retail display cases of this shape also fit bakery counters.
Work Zone and Storage
The middle section holds the coffee machine and grinder. A wood work top gives 1.2 m of clear space. Two lockable drawers under the top take tools and cups. A slim bar shelf keeps syrups and lids within reach. Waste bins sit in a closed bay at the rear. Cables run in a channel under the counter, not on the floor. Staff move around the coffee kiosk without stepping outside.
Size and Site Fit
The unit measures 3.0 m by 2.0 m in plan. Height stops at 2.2 m, under most mall clearance limits. Three stools fit the outer counter for short stays. A 12 to 16 sqm plot holds it with service space. Airports and transit halls take this shape well. Two aisles can shop at once without a queue lane. A smaller 2.4 m build keeps the same coffee kiosk layout. The service counter height is set at 950 mm, and the cash wrap sits at the rear corner.
Finish and Assembly
Powder-coated steel is used for every frame part. The coating resists chipping at trolley height. Laminate surfaces wipe clean with a damp cloth. Glass edges are polished and sealed into rubber gaskets. Sections of this coffee kiosk are built in the workshop, then coded. Site work is bolting sections and joining the lights. Each coffee kiosk arrives with a marked layout sheet. Extra countertop cases can be added at the order stage.
Cost and Custom Options
What makes this unit work is the split layout. Drinks run in the centre and food sells at both ends. That keeps two staff busy without crossing paths. Dark fluted finishes hide marks better than gloss. List price starts at USD 11,500 for the 3.0 x 2.0 m build. ukiosks makes this coffee kiosk to order in Shenzhen. We can reset case count, counter depth, wood tone and canopy size. Send a plan and we return sections, drawings and a quote. The same frame suits coffee and food store fit-outs.
| Specification | Detail |
|---|---|
| Overall size | 3.0 x 2.0 x 2.2 m (custom sizes available) |
| Cabinet body | 18 mm plywood, black fluted laminate |
| Counter top | Solid wood, sealed for food use |
| Frame | Powder-coated steel with mesh canopy |
| Display cases | Two curved glass cases, four shelves each |
| Lighting | LED strip and downlights, 220 V |
| Packing | Three crates, about 380 kg total |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:









Reviews
There are no reviews yet.