UniqueKiosk · Shenzhen workshop

Doored Glass Tower Display Case with Two Base Doors

$820.00

Black frame tower display case with five glass shelves, a lit crown band and two base doors. Price range: USD 820-1,240, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Lit Tower Frame

A slim black steel frame carries this display case tower at four corners. The frame runs 30 mm square and holds a lit band under the top rail. A shop sets the light at 3000 K and the glass shelves carry a soft wash. The band also hides the driver inside the crown box. Display cases list this frame size. A crown box also keeps the cable run out of sight.

glass tower case

Five Glass Shelves

Five clear glass shelves divide this display case at a 300 mm pitch. Each shelf takes an 8 mm tempered board with a polished front edge. A shop sets a boxed item on the top shelf and a flat item below. The shelf on this display case clips into the side rails, so a level move needs no drill. Display shelves use this shelf gauge. A short pane also keeps the glass from swinging in a busy aisle.

tower case front

Two Base Doors

Two doors close the base of this display case at 600 mm high. Each door runs 450 mm wide on a sliding track and takes a slim recessed pull. A shop keeps the spare stock and the cleaning kit inside the bay. The bay also takes a lock plate for a nightly close. Retail displays fixtures share this door height. A low bay also keeps the stock within reach of a short staff member.

tower case side

Shop Use

This display case fits a museum lobby, a jewelry hall or a hotel reception. The footprint runs 900 x 450 mm. A pair of units then covers a 1.8 m bay. A shop sets the tower 500 mm from a wall and keeps the aisle at 1000 mm. A black frame also reads quiet under a 3000 K spot. Display racks fit the same bay.

Load and Care

Each glass shelf of this display case holds 14 kg across a 850 mm span. Keep a heavy ceramic on the low shelf, since the glass bows under a point load. The tower stays level within 2 mm when the base sits flat. Wipe the glass with a soft cloth and water only, and dust the lit band each month. Check the door track for grit, since grit slows the roller. Read more about our bench on our lit towers.

base door detail

Size Options

Width runs at 900 mm or 1200 mm on request. Height runs at 2000 mm or 2200 mm. A shop can order a lockable base, or a mirrored back in place of clear glass. The frame comes in neutral black, satin white or brushed brass. List price starts at USD 820 for the 900 mm unit. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Width 900 mm
Height 2000 mm
Depth 450 mm
Shelves 5 tempered glass
Light LED band, 3000 K
Base 2 sliding doors
Load 14 kg per shelf

Reviews

There are no reviews yet.

Be the first to review “Doored Glass Tower Display Case with Two Base Doors”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop