UniqueKiosk · Shenzhen workshop

Cupcake Kiosk in Pink and White With Arc Glass Cases

$12,000.00

Pink and white cupcake kiosk with three arc glass cases, glass guard panels and a mint light box, sized 4.0 x 3.0 m. Price range: USD 9,000-15,000, set by size and case count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Pink and White Bodies

White laminate bodies carry this bakery kiosk, with a pink band at the skirt. The band runs 400 mm high and wraps both front faces. Panels are 18 mm ply with a coloured laminate face. Corners take an aluminium trim, so edges stay square. A round pink panel sits on the left front face and stays plain. Glass guards rise 300 mm above the low counters. This bakery kiosk holds two colour notes only, white and pink. The food and drinks aisle gets a clean front line at low cost.

pink cupcake kiosk

Three Arc Glass Cases

Three curved glass cases sit along the display run. Each case is 900 mm long with two shelves and cake stands. The arc front leans back 15 degrees, so the top row shows. Frames are bright stainless with a satin finish. Shelves are 6 mm tempered glass. A hinged rear flap lets staff load trays from inside. Cases sit on a raised deck, 100 mm above the white top. This bakery kiosk keeps cakes covered during service. display cases with flat fronts show less of the top row.

cupcake kiosk front view

Guard Panels and Light Box

Glass guard panels close the right counter and the left return. Guards are 6 mm tempered glass, set in a steel channel. The right counter holds the till and a card reader. A mint laminate light box stands at the right end, 1.9 m tall. The box face stays blank, ready for a logo cut. Cables on this bakery kiosk run inside the box, away from the counter deck. Every bakery kiosk we build can take a lit box at either end.

cupcake kiosk side view

Build and Assembly

Bodies are framed in 30 mm steel tube and clad in laminate. Sheets are cut on a saw, then edge banded. Pink parts are cut from one sheet run, so tones match block to block. Glass is tempered and boxed apart from the frames. Lamp housings sit in sealed aluminium channels. Every bakery kiosk is assembled once in the workshop before crating. countertop cases cases can drop into the deck openings. cash counter parts share the same tube size.

arc case cake stands

Plot and Delivery

The plan measures 4.0 m by 3.0 m, with the light box at 1.9 m. It suits plots from 16 to 22 sqm with a queue strip. Weight lands near 520 kg across six crates. Cases ship boxed, so nothing rests on the glass. Site work is bolting bodies, then setting cases and guards. A crew of three needs about two days. One 16 A circuit runs the case lights and the box. retail display fixtures rules apply at each counter end.

Price and Custom Build

Three arc cases sell cupcakes better than one deep case. Pink bodies pull a family crowd in a food hall. White tops stay readable under warm mall light. List price starts at USD 12,000 for the 4.0 m layout. A two case bakery kiosk at 3.0 m lands near USD 10,300. ukiosks builds this bakery kiosk to order in Shenzhen. We can change case count, colour pairing, guard height and box size. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs counters use the same white laminate body.

Specification Detail
Overall size 4.0 x 3.0 x 1.9 m (custom 3.0-4.6 m)
Body Coloured laminate on 18 mm plywood
Display cases Three arc glass cases, 900 mm each
Glass 6 mm tempered shelves and guard panels
Light box Mint laminate box, blank face
Lighting Case LEDs and box panel, 220 V
Packing Six crates, about 520 kg

Reviews

There are no reviews yet.

Be the first to review “Cupcake Kiosk in Pink and White With Arc Glass Cases”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop