UniqueKiosk · Shenzhen workshop
Crystal Acrylic Tabletop Sign Frame With Stand
$150.00
Tabletop sign frame in thick crystal acrylic with a clear border and a low metal stand, for an A5 sheet at 148 x 210 mm. Price range: USD 100-200, set by size and stand type.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Thick Acrylic Block
A clear block reads like glass with half the weight. This sign frame is built from two 5 mm acrylic sheets with a 10 mm border gap. The inner sheet carries the print, and the outer sheet clamps it. Four screw caps hold the pair together at the corners. The border gives the print a clean white edge. At A5 size it measures 148 x 210 mm and weighs 800 g. A shopper sees the sheet through the border with no frame line. The countertop cases range adds a matching lit panel.
Low Metal Stand
A low metal stand sets this sign frame at a reading angle. Two stainless tubes run from the bottom screws to a flat foot. The angle is 15 degrees, so a seated shopper reads the whole sheet. The foot is 90 mm deep and sits flat on a counter. A sign frame on a stand takes less space than a printed card holder. Tubes can be swapped for a longer pair to raise the sheet. The stand comes off for a flat lay fix, which retail display fixtures crews often ask for. Every sign frame we ship gets a tilt test.
Print Insert
Inserting a sheet into this sign frame takes under a minute. Staff lift the outer sheet and slide the print over the inner one. Two corner screws stay in place, and two come out for the swap. A standard paper sheet needs no backing. A thicker card up to 1.5 mm also fits the gap. A border of 10 mm is left clear, so a full bleed print reads clean. The acrylic wipes down with a soft cloth. display cases counters keep one spare print.
Build And Packing
Acrylic for this sign frame is cut on a laser and flame polished at the edge. The polish removes the saw line, so the border reads clear. Screws are stainless with a domed cap. The stand tubes are cut, deburred and fixed with a thread insert. Each sign frame is squared on a bench before packing. A protective film covers both faces until install. Packing is one carton with a foam sleeve. cash counter desks take a pack of four.
Counter Uses
This sign frame suits a price card, a tasting note and a small brand board. At A5 it fits a bakery case top or a hotel room desk. A 15 degree tilt keeps a seated reader from leaning in. The clear border does not hide the message behind a dark moulding. A stand foot stays put on a stone or glass top. The frame can switch from portrait to landscape by moving the tubes. Many shop fit outs use one per display shelf. food and drink shops desks use two.
Price And Custom Build
List price starts at USD 150 for this A5 unit. A set of four lands near USD 480 with one print run. A sign frame keeps a price card clean and upright on a busy counter. A thick acrylic border needs no moulding or paint. A low stand reads well for a seated customer. ukiosks builds this sign frame to order in Shenzhen. We can reset sheet size, border width, stand height and screw finish. Send your plan and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Sheet size | A5, 148 x 210 mm (custom A6-A4) |
| Acrylic | Two 5 mm clear sheets |
| Border | 10 mm clear edge gap |
| Fix | Four stainless screw caps |
| Stand | Stainless tubes at 15 degrees |
| Weight | About 800 g |
| Packing | One carton with foam sleeve |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.