UniqueKiosk · Shenzhen workshop

Croissant Booth With Wood Canopy and Glass Display Case

$13,600.00

White bakery booth with a wood slat canopy, linear ceiling lights and a curved glass display case, sized 5.0 x 4.0 m for food halls. Price range: USD 9,000-15,000, set by size and light count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wood Slat Canopy

A wood slat canopy covers the whole counter of this bakery kiosk. The canopy is 4.6 m by 3.6 m, framed in 40 mm steel and clad in veneered slats. Slats run one way, with a 15 mm gap, so air moves through. Six linear LED bars sit between the slats, aimed down at the case. The canopy clears the counter by 2.2 m, enough for a tall person. Shadow under the canopy stays soft at night. This bakery kiosk reads as a lit room from the next aisle. The food and drinks bay gets a strong overhead line.

bakery booth with canopy

White Counter Body

White tiled panels clad the counter body of this bakery kiosk. Tiles are 100 mm square with a 2 mm grout line. The body stands 1,100 mm high and 900 mm deep on the service side. A warm LED strip runs at the base, washing the plinth. Vegetable crates sit under the counter, out of view. The counter face takes cleaning without streaks, unlike gloss paint. Tile joints hide small scuffs at trolley height. Guards of glass sit on the low back counter. Every bakery kiosk we build here uses the same tile module.

bakery booth front view

Curved Glass Case

A curved glass case runs along the front counter, 3,000 mm long. The case has one shelf and a front arc that leans back. Trays sit on the shelf at 1,050 mm, easy to reach. Glass is 5 mm tempered, framed in slim aluminium. A rear sliding door on this bakery kiosk lets staff load from the counter side. Lights sit under the top frame, so food stays bright. display cases with a flat front can join the same run. This bakery kiosk keeps hot food covered while it sells.

bakery booth side view

Signs and Screens

Two tall panels stand at the counter ends. Both are oval light boxes on steel stems, 1,700 mm tall. Faces are blank acrylic, lit from behind by an LED sheet. A screen frame sits at the right end for a menu display. Cables run down the stems into the counter body. Panels can face the aisle or the queue, as the plan needs. Leave the screens off during a photo shoot. cash counter bays hold the till and card reader.

canopy and glass case

Build and Delivery

The plan measures 5.0 m by 4.0 m, with the canopy at 2.6 m. It suits food hall plots from 18 to 24 sqm. Weight lands near 700 kg across eight crates. The canopy ships in two halves, joined on site with a seam splice. Site work is bolting bodies, then setting the canopy and the case. A crew of three needs three days. One 16 A circuit runs the linear bars and the two light boxes. countertop cases cases fit the back counter as extras.

Price and Custom Build

A lit canopy pulls a queue from the far end of a food hall. White tiles keep the front bright at any hour. Long glass runs sell hot food faster than stacked trays. List price starts at USD 13,600 for the 5.0 m build. A two sided bakery kiosk without the canopy lands near USD 11,900. ukiosks builds this bakery kiosk to order in Shenzhen. We can reset canopy span, tile size, light bars and case length. Send your plan and we return drawings, sections and a quote. Nearby retail display fixtures counters and coffee fit-outs bays use the same frame.

Specification Detail
Overall size 5.0 x 4.0 x 2.6 m (custom 3.6-6.0 m)
Canopy Veneered wood slats in 40 mm steel frame
Counter body 100 mm white tiles on 18 mm plywood
Display case Curved glass case, 3,000 mm
Glass 5 mm tempered, aluminium frame
Lighting Six linear LED bars and two light boxes, 220 V
Packing Eight crates, about 700 kg

Reviews

There are no reviews yet.

Be the first to review “Croissant Booth With Wood Canopy and Glass Display Case”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop