UniqueKiosk · Shenzhen workshop

Cradle Frame Clothing Rack with Twin Shelf Plates

$318.00

Frame clothing rack with one shelf under the top bar, one lower shelf and a plate base. Price range: USD 318-440, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Shelf Under Bar

A flat plate sits 200 mm under the top bar of this clothing rack. The plate runs the full width. A shop sets a hat box or a folded stack above the hang line of this clothing rack. The top bar carries a short hanging drop below the plate. A shop uses the drop for two signature pieces. The plate also gives the frame a closed top edge. Display racks list this plate.

cradle frame clothing rack

Lower Shelf

A second plate sits at 900 mm on this clothing rack. The plate runs 600 mm deep, so a shoe box fits flat. A shop sets folded denim on the lower plate and hangs jackets above. The plate edge folds down 25 mm. This edge keeps the board straight under a stacked load on this clothing rack. Retail displays fixtures share this plate bracket.

clothing rack plates front

Plate Base

A steel plate closes the floor line of this clothing rack at 50 mm. The base spreads the load on four welds, so the frame stands without a wall strap. A shop sets a basket on the base and keeps the shelves for stock. The base also lets staff slide the unit for a reset. Clothing racks list this plate base.

clothing rack plates side

Shop Fitting

The clothing rack suits a compact boutique, a hotel wardrobe bay or a showroom corner. The stack of plates shows stock at three heights. A shop sets this clothing rack beside a fitting mirror and a low bench. This pairing keeps the bay narrow. The closed top also hides a stock box on the upper plate. Countertop displays fit the same bay.

Load And Care

Each shelf plate holds 30 kg and the base plate 40 kg on this clothing rack. Keep the heavy stock on the base, since the upper plate sits on a lighter bracket. A loaded frame stays level within 2 mm across the base. Check the plate brackets after a month, since a loose bracket lets a plate dip. Wipe the plates and avoid a wet mop on the welds. Read more about our bench on our plate frames.

clothing rack base weld

Size Options

Width runs from 800 mm to 1100 mm on request. Height runs at 1700 mm or 1850 mm. A shop can add a third plate at 1300 mm. The plates can also swap for a marble board. The finish also comes in chalk white or oxide grey. List price starts at USD 318 for the 900 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.

Specification Detail
Width 900 mm
Height 1750 mm
Frame 22 mm square steel
Plates 3, including base
Depth 600 mm
Load 30 kg plate, 40 kg base
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Cradle Frame Clothing Rack with Twin Shelf Plates”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop