UniqueKiosk · Shenzhen workshop

Cookie Counter in White Wood With Glass Case and Sink

$2,600.00

White washed wood bakery counter with a stone look work top, stainless sink, open shelf bays and a glass display case, sized 4.4 x 1.0 m. Price range: USD 600-2,500, set by length and case size.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

White Wood Counter Run

White washed wood faces this bakery counter along its whole length. Boards run vertical on the case blocks and horizontal on the long low run. The finish is a light stain with a matte seal, so it never looks grey. Low bays hold cookie boxes and cubby shelves on 400 mm centres. The run stands 900 mm high, with a 60 mm shadow gap below. Transitions between bays use a straight joint, so lines stay sharp. This bakery counter suits a corner shop front. The food and drinks floor plan fits it along one wall.

white wood bakery counter

Stone Top and Sink

A grey stone look top runs the full length at 20 mm thick. It is compact laminate on a ply core, so it takes weight without sagging. A stainless sink sits at the middle, 500 mm wide, with a mixer tap. A drain board runs 300 mm either side. The top holds trays, scales and packing sheets. Cookies cool on the top of this bakery counter before boxing. Every bakery counter needs a washing point this close to the packing line. Wipe down takes one cloth pass on this finish.

bakery counter front view

Shelf Bays and Glass Case

White shelf bays rise behind the sink run, 1,100 mm above the top. Three lines hold jars, canisters and tins. Bays are 300 mm deep, so tall tins still clear the wall. A glass display case sits at the right end, 900 mm by 600 mm. The case has two shelves and a lit inner face. Lids, labels and bags go under the case top. This bakery counter keeps packing stock behind glass. display cases of the same size can replace the case in one bay.

bakery counter sink top

Build and Finishing

Carcass parts are 18 mm ply with a sealed core. White washed faces are stained, then sealed twice. The top is glued and edge trimmed in the shop. Sink bowls are pressed stainless, welded to the top strip. Glass in the case is 5 mm tempered. Every bakery counter is assembled once in the workshop before crating. cash counter drawers can replace one low cubby bay. countertop cases cases fit the free top when a shop needs a second display point.

glass case cookie trays

Fit and Delivery

The run measures 4.4 m by 1.0 m. The top sits at 900 mm and the bays rise to 2.0 m. It suits shop floors with a 1.2 m walkway behind. Weight lands near 260 kg across three crates. Sections join at the bay line with cam locks. Site work is levelling the plinth, then locking bays and setting the top. Sink plumbing is done on site by the fitter. Two people need about five hours. retail display fixtures clearance rules apply at the case end.

Price and Custom Build

A washing point inside the counter saves a walk to the back room. Open bays sell tins and boxes without a key. White wood hides flour dust better than gloss white. List price starts at USD 2,600 for the 4.4 m run. A shorter bakery counter at 3.0 m lands near USD 1,900. ukiosks builds this bakery counter to order in Shenzhen. We can reset run length, sink position, bay count and case size. Send your plan and we return drawings and a quote. Nearby coffee fit-outs counters and food and drink fit outs use the same bay module.

Specification Detail
Overall size 4.4 x 1.0 x 0.9 m (custom 3.0-5.4 m)
Body White washed wood on 18 mm plywood
Work top 20 mm stone look compact laminate
Sink Stainless bowl with mixer tap and drain board
Shelf bays Three lines, 300 mm deep
Display case Glass case, 900 x 600 mm, two shelves
Packing Three crates, about 260 kg

Reviews

There are no reviews yet.

Be the first to review “Cookie Counter in White Wood With Glass Case and Sink”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop