UniqueKiosk · Shenzhen workshop

Bubble Tea Kiosk in Black Frame With Curved Glass Counters

$12,800.00

Black frame bubble tea kiosk with two curved glass display counters, wood veneer base and spot track lighting, sized 3.0 x 2.4 m for mall plots. Price range: USD 9,000-15,000, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Black Frame and Track Lights

A black steel frame sets the shape of this bubble tea kiosk. The frame is 50 mm square tube with a matte powder coat. It rises 2.3 m from the floor and carries four track spotlights. Cross beams give the top a grid look and stiffen the unit. Wood veneer panels sit low, under the counters. White counter tops close the top edge. The empty frame line leaves room for a fascia sign later. Nothing on the frame touches the mall ceiling. Cross beams keep the bubble tea kiosk rigid when it moves.

black frame bubble tea kiosk

Curved Glass Counters

Two curved glass counters face the aisle, one at each end. Each counter is 1.2 m long with two glass shelves inside. The curved front shows cups and toppings from 3 m away. Sliding doors open at the staff side only. Glass is 5 mm tempered and set in rubber gaskets. Retail display cases of this style share the same hinge and lock parts. White block dividers sit between the counters of this bubble tea kiosk.

bubble tea kiosk front view

Cup Station and Menu Panel

Three cup dispensers stand on the rear counter of this bubble tea kiosk. A shaker station and a sealing machine sit beside them. The rear run is 1.4 m wide, enough for two staff. A light box panel holds the menu at eye height on the left frame leg. Countertop cases can replace one dispenser bay for pudding cups. Cups, lids and straws go into open bays below the counter. A cash counter is set on the right, clear of the queue.

bubble tea kiosk left side

Build and Finishes

Base bodies use 18 mm plywood with a wood veneer face. Veneer panels are sealed twice, since steam sits low in these units. Counters are 1.2 mm stainless steel on a ply core. Frame joints are welded, ground and then coated, never painted over. Glass shelves carry steel pins with rubber sleeves. Every bubble tea kiosk we ship gets a dry run in the workshop. Panels are marked by section before they are packed.

curved glass counter detail

Plot Size and Service Flow

The unit measures 3.0 m by 2.4 m, with height at 2.3 m. It suits plots from 12 to 18 sqm, queue space included. Service works from the front face only, so no side aisle is lost. Staff restock from the rear, through a gap in the counter run. One 16 A circuit runs lights and the sealing machine. Weight lands near 320 kg, spread over six feet of level feet. A bubble tea kiosk of this size needs a flat floor. A bubble tea kiosk this wide takes two staff at peak hours. Check retail display fixtures rules before you fix floor plates.

Price and Custom Options

Two glass counters sell more than one long case in a food hall. The black frame holds up where trolleys hit it. Wood veneer softens a unit that would look cold in plain white. List price starts at USD 12,800 for the 3.0 m build. ukiosks builds this bubble tea kiosk to order in Shenzhen. We can reset counter length, frame colour, menu panel size and shelf count. Send your plan and we return drawings, sections and a quote. Related food and drinks and coffee fit-outs use the same frame system.

Specification Detail
Overall size 3.0 x 2.4 x 2.3 m (custom 2.6-3.6 m)
Frame 50 mm black powder-coated steel tube
Base panels Wood veneer on 18 mm plywood
Display counters Two curved glass cases, two shelves each
Counter top 1.2 mm stainless steel
Lighting Four track spotlights plus light box, 220 V
Packing Three crates, about 320 kg

Reviews

There are no reviews yet.

Be the first to review “Bubble Tea Kiosk in Black Frame With Curved Glass Counters”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop