UniqueKiosk · Shenzhen workshop

Bowed Jewellery Counter with Curved Glass Top

$1,350.00

Curved glass jewellery counter with a black frame and four tapered legs. Price range: USD 1,350-1,900, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Curved Glass Deck

A bowed glass top gives this jewellery counter its outline. The deck runs 1200 mm wide and 700 mm deep. It sweeps in a soft arc across the front. A curved pane sits on a thin black frame with a small step at the joint. A shop fills the deck with pads and the curve keeps them angled to the aisle. Glass for this jewellery counter is laminated, so it stays firm over the span. Jewellery displays list this counter size. A white matte plate sits under the glass at 900 mm height.

Frame and Legs

Four tapered legs carry this jewellery counter on a slim frame. Each leg runs 40 mm at the top and 25 mm at the floor. A shop sets the counter on a plain floor and the legs read light. The frame takes a leveller on each foot. A floor that runs 2 mm off still sits flat. A two pack black lacquer covers the frame and the legs. That coat takes a trolley knock without a mark. Retail displays fixtures use the same leg taper.

Deck Layout

A ring tray, a necklace pad and an earring card all fit one deck. This jewellery counter keeps every pad within arm reach of a clerk. The low hood also keeps a light rig out of the frame line. A pair of counters side by side make a horseshoe layout at 1400 mm pitch. A shop sets the counter 100 mm off a wall and keeps the aisle at 1000 mm. Display cases sit in the same bay.

Styled for Retail

A styled deck turns this jewellery counter into a working display. Grey velvet pads hold the gold pieces and a ring tray sits in the middle. A shop pairs the counter with a lit wall bay behind and the pieces read bright. Store display racks stand beside it for the stock trays. A pair of earring cards sit at the far end of the deck. A shopper sees the full set from the entrance.

Load and Care

The glass deck of this jewellery counter holds 25 kg spread over the plate. The frame holds 60 kg in total when the load stays near the legs. Keep a heavy tray over a leg, since a slim frame bends between two legs. Wipe the glass with a soft cloth and water only. Dust the lacquer each month. Check the levellers each quarter, since a soft floor lets a foot sink. About our bench covers the bent glass build.

Size Options

Width runs at 1000 mm or 1200 mm on request. The arc also comes as a half round or a full round. A shop can order a velvet pad set for this jewellery counter. A lock on the hood edge is also available. The frame comes in brass or bronze in place of black. List price starts at USD 1,350 for the 1200 mm unit. ukiosks builds this jewellery counter in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Width 1200 mm
Depth 700 mm
Height 900 mm
Top Curved laminated glass
Frame Black lacquer
Legs 4 tapered, levelled
Load 25 kg deck, 60 kg total

Reviews

There are no reviews yet.

Be the first to review “Bowed Jewellery Counter with Curved Glass Top”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop