UniqueKiosk · Shenzhen workshop
Boltless Rivet Shelving Steel Display Rack
$318.00
Four tier boltless rivet shelving display rack in graphite grey steel. Price range: USD 318-460, set by tier count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Rivet Assembly
Four posts and four plates form this display rack, and the parts join on a rivet. A rivet sits in a slot, so a shop sets a shelf height in one minute with no bolt. The slot pattern runs every 50 mm up the post. A one person build of this display rack takes about 12 minutes with a rubber mallet. Display racks list this rivet joint.
Wide Plates
Each plate of this display rack runs 900 mm wide and 450 mm deep. A plate carries a wide stack of stock in a single row. A shop puts a full size range on one shelf. The plate edge folds twice for stiffness. The grey finish hides a scratch better than a black face. Retail displays fixtures share this plate fold.
Side Braces
Stepped cross braces run along each side of this display rack. The braces tie the two posts and stop the frame from swaying under a stacked load. A shop leans a ladder on the side without a wall strap. The braces on this display rack also keep the plate rows square during a move across the floor. Display shelves list this side brace.
Shop Use
The display rack suits a stock room, a back of house corner or a bulk sales floor. Four wide rows take cartons, jars or bagged goods. A shop sets the unit at the end of an aisle and labels the rows. The grey frame of this display rack also blends with a bare concrete wall and a grey floor. Countertop displays fit the same aisle.
Load And Care
Each plate holds 120 kg on this display rack, so a full unit carries about 480 kg. Keep the heavy cartons on the low plate, since the frame stands on four feet only. A loaded rack stays level within 3 mm across the base. Check the rivets after a month, since one loose rivet lets a plate rock. Wipe the plates and keep the slots dry. Read more about our bench on our shelving work.
Size Options
Width runs from 900 mm to 1500 mm on request. Height runs at 1600 mm, 1800 mm or 2000 mm. A shop can order three or five tiers for a different stack height. The plates can carry a wire deck instead of a solid face. The finish also comes in matte black or chalk white. List price starts at USD 318 for the four tier unit. ukiosks builds this display rack in Shenzhen to order, so send your load plan through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1800 mm |
| Depth | 450 mm |
| Tiers | 4 plates |
| Slot step | 50 mm |
| Load | 120 kg per plate |
| Finish | Graphite grey powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.