UniqueKiosk · Shenzhen workshop

Black Museum Display Case With Sliding Glass Front

$1,320.00

Black museum glass display case with a sliding glass front, four shelves and an internal LED bar, sized 1.0 x 0.45 x 2.0 m. Price range: USD 300-1,500, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Case for Museum Pieces

A sealed glass display case protects pieces on open display. This unit is 1,000 mm wide, 450 mm deep and 2,000 mm tall. The top cap runs 200 mm high to hold a light bar. A black cabinet at the base takes padded boxes and mounts. Glass sits on four sides, so a piece reads from any approach. The case holds a 400 mm tall piece on the lowest shelf. Museum layouts use it for ceramics, models and small sculpture. The display cases range covers the shorter 1.6 m variant.

black museum display case

Sliding Glass Front

A sliding glass front opens this glass display case without a swing arc. Two panes run on a top rail and a bottom track, each 500 mm wide. A staff member slides one pane behind the other to reach in. The gap is 480 mm, wide enough for two hands. A key lock sits on the rail and stops both panes. Slides are nylon rollers in an aluminium track. Nothing swings into the aisle, so the case can sit close to a wall. Coffee bars use the same door type in their shop fit outs.

museum case front view

LED and Shelves

A slim LED bar runs under the top cap of this glass display case. The bar is 3000 K, about 12 W per metre, aimed down the case. Four glass shelves split the space into five levels. Each shelf is 8 mm glass with a polished edge, rated 20 kg. A white deck panel sits at the base, so small pieces read against a light field. The light line hides behind the cap edge. No glare reaches the visitor eye. countertop cases cases use the same bar. This glass display case ships with clear fitting notes.

museum case side view

Black Frame Build

A matte black steel frame holds the glass in place. Frame sections are 30 mm box tube with a powder coat at 70 gloss. Corners are welded, then ground flat. Glass sits in a gasket channel with a 3 mm gap for shock. The base cabinet is 18 mm board with a laminate face and two doors. Feet are adjustable, so the case levels on stone floors. Every glass display case is assembled and lit on a test floor before packing. retail display fixtures crews fit the top cap last. This glass display case ships with clear fitting notes.

base cabinet lock detail

Placement in a Gallery

This glass display case suits a gallery wall or a museum room edge. A 1 m run leaves a 900 mm walkway in a 4 m room. The black frame reads quiet against light walls and strong against dark ones. Pair units along a wall for a continuous run with 20 mm gaps. Power needs one 16 A socket per three units. Labels sit on the shelf edge, not the glass. Many cash counter desks sit at the room entry. The food and drink shops package covers a cafe counter nearby.

Price and Custom Build

A sliding front keeps the case tight to a wall and safe for a crowd. A black frame hides finger marks better than silver. An internal LED bar lights the goods and not the room. List price starts at USD 1,320 for the 1 m unit. A 1.4 m two-door build lands near USD 1,680. ukiosks builds this glass display case to order in Shenzhen. We can reset height, shelf count, light colour and frame finish. Send your floor plan and we return drawings and a quote.

Specification Detail
Overall size 1.0 x 0.45 x 2.0 m (custom 0.8-1.6 m)
Glass 8 mm shelves, 6 mm panels, polished edges
Front Two sliding panes with a key lock
Frame 30 mm steel box tube, matte black
Lighting LED bar at 3000 K, 12 W per metre
Base Two-door cabinet with adjustable feet
Packing One crate, about 120 kg

Reviews

There are no reviews yet.

Be the first to review “Black Museum Display Case With Sliding Glass Front”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop