UniqueKiosk · Shenzhen workshop
Ash Black Retractable Belt Stanchion, 950 mm
$55.00
Queue stanchion in black coated steel with a 2 m retractable belt and a weighted round base. Price range: USD 55-140, set by belt length and pack size.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Post and Belt
This queue stanchion stands 950 mm tall on a 350 mm base. A queue stanchion of this height sets a lane that shoppers read at a glance. The belt pulls out 2 m and locks at four stops. The post is 63 mm tube, so a lane keeps its line. The base weighs 6 kg, so a post holds against a brush. One post sets a lane of 2 m with the next. A retail display plan marks the lane.
Steel Build
The post body is 1.2 mm steel with a black powder coat. A queue stanchion in this gauge takes a daily pull without a wobble. The belt is woven nylon with a steel core, so a lane stays taut. The spring sits in a sealed housing, so a slow retract lasts. The base is cast with a rubber ring, so a post grips tile. A dry cloth clears a mark from the coat.
Lane Setup
A queue stanchion of this weight sets in one minute with no tool. A staff drops the base, then pulls the belt to the post ahead. A lane of four posts takes 6 m of floor. The belt locks at a short stop, so an entry stays narrow. A post carries a sign plate on the top slot. Four posts stack in a crate of 700 mm. Our store fixture crew ships this crate.
| Specification | Detail |
|---|---|
| Height | 950 mm |
| Post tube | 63 mm |
| Base | 350 mm |
| Belt | 2 m |
| Base mass | 6 kg |
| Stops | 4 |
| Finish | Black |
Shop Use
A boutique uses this queue stanchion outside a fitting room. A bank uses one for a teller line. A cinema uses one at a ticket desk. A trade show uses one at a booth edge. Store fixtures of this build pair with a floor mat. A lane of 2 m per post keeps a queue off a display bay. A countertop display sits by the lane.
Build Notes
The tube cuts on a saw, then welds to a base plate. A queue stanchion of this build keeps a straight post after a season. The head housing forms on a die, so a belt slot stays clean. The coat bakes at 200 C, so a post resists a knock at a door. Each lot is tested for a full belt pull and a firm retract. Read our bench notes for the spring check.
Sizes and Price
Height runs at 950 or 1050 mm for this queue stanchion. The belt comes 2 or 3 m. The finish comes in black, chrome or sand. The base comes round or crossed. A sign plate, a belt end clip and a carry bag are options. List price starts at USD 55 for the 950 mm post. ukiosks builds this queue stanchion in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.