UniqueKiosk · Shenzhen workshop

Amber Clear Acrylic Pegboard Bin, 190 mm

$14.00

Pegboard bin in clear acrylic with a hooked back tab, sold as a single unit. Price range: USD 14-38, set by bin depth and pack size.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Bin and Hook

This pegboard bin runs 190 mm deep and 150 mm wide. A pegboard bin of this size holds about 30 small parts. The back tab hooks into a 6 mm hole, so the bin hangs without a screw. The front wall slopes at 35 degrees, so a part reads from the aisle. The base sits flat at 6 mm, so a bin takes a load without a sag. A bin holds 4 kg of small goods. A retail display board uses this bin.

Acrylic Build

The body is 3 mm clear acrylic, bent on a hot line. A pegboard bin in this gauge keeps a clear face after a wipe. The edges polish, so no cut line shows at the rim. The tab bends in one press, so each bin hooks the same. The base joins the walls with a solvent bond, so a bin holds water without a leak. A dry cloth clears a dust line from the face.

Wall Set

A pegboard bin of this depth fits a 25 mm pitch board. A shop sets a row at 200 mm centres, so a parts line reads even. The bin hangs at 1200 mm for a reach line and 1600 mm for a browse line. A staff sets a row of twenty bins in about eight minutes. A bin lifts off by hand, so a reset takes no tool. A label strip sits on the bin face as an option. Our store fixture wall shares this pitch.

Specification Detail
Depth 190 mm
Width 150 mm
Acrylic 3 mm
Front Slope 35 degrees
Load 4 kg
Finish Clear
Weight 0.3 kg

Shop Use

A hardware shop sets this pegboard bin on a parts wall. A craft shop uses a row for beads and findings. A bike shop uses one for bolts and caps. A trade show uses a row at a booth. Shelving of this build pairs with a pegboard panel. A panel of 600 mm holds three bins at this pitch. A wire grid display panel takes the same hook.

Build Notes

The sheet is cut on a laser, then bent on a hot line. A pegboard bin of this build keeps a square corner after a move. The tab is bent on a jig, so the hook depth stays true. The rims are flame polished by hand. Each bin is checked for a level base and a straight tab before packing. Read our bench notes for the hot bend.

Sizes and Price

Depth runs at 150, 190 or 250 mm for this pegboard bin. The width runs at 100, 150 or 200 mm. The material comes as clear, white or black acrylic. The pack runs as a single, a five or a ten. A divider, a label strip and a mounting bar are options. List price starts at USD 14 for the 190 mm bin. ukiosks builds this pegboard bin in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Amber Clear Acrylic Pegboard Bin, 190 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop