UniqueKiosk · Shenzhen workshop

Alden Aluminium LED Display Case Light Bar, 500 mm

$120.00

Display case light bar in an aluminium profile with a milk diffuser and 12 V wiring. Price range: USD 120-260, set by length and pack count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Bar Profile

This display case light bar runs 500 mm long in a 12 mm aluminium profile. A milk white diffuser sits over the diodes and spreads the beam. A display case light bar with a diffuser removes the dot pattern on glass. The profile is 8 mm thick, so it tucks under a shelf at 400 mm depth. Each bar carries about 45 diodes on a strip at 60 per metre. The end cap takes a 12 V lead with red and black wires. Countertop organisers use a similar slim profile.

Light Quality

The diode runs at 4000 K or 6000 K for this display case light bar. A neutral white shows gold and silver at true tone. A display case light bar at 6000 K suits glass and watch cases. Output runs at about 600 lm per metre. The diffuser cuts glare, so a customer reads a tag without a hot spot. A dimmer switch on the low voltage side sets the level. Colour rendering sits above 90, so a red stone stays red. Our display stands take the same driver.

Mounting

Small steel clips hold this display case light bar under a shelf or a top frame. A clip takes one screw and holds the profile flat. A display case light bar also fits into a slot at 13 mm wide. The lead runs to a driver in the base or behind the back panel. Two bars join end to end for a long case. A shop wires a group to one switch at the counter. Display boxes take the same clip.

Specification Detail
Length 500 mm
Profile 12 mm aluminium
Tone 4000 K or 6000 K
Output 600 lm per metre
Voltage 12 V DC
Diffuser Milk polycarbonate
Pack Three bars with clips

Case Use

A jewellery counter puts this display case light bar above each shelf. A watch dealer sets one bar on the top frame only. A museum case uses a warm tone on textiles. A bakery case takes a bar over the pastry tray. Store display shelves pair with this length. A shop with a deep case runs two bars, one front and one back, so the stock reads flat.

Build Notes

The profile is extruded aluminium with an anodised finish. Each strip is a 2835 diode on a copper board with a heat pad under it. A display case light bar of this build runs cool, so a glass shelf does not fog. The diffuser is a polycarbonate cover that clips into the profile groove. Each unit is tested for a full run and a clean joint before packing. Read our bench notes for the driver detail.

Sizes and Price

Length runs at 300, 500 or 1000 mm for this display case light bar. Tone runs at 3000, 4000 or 6000 K. The pack comes with clips, end caps and a 12 V lead. A driver, a dimmer and a longer lead are options. A shop can also order a magnetic version for a steel frame. List price starts at USD 120 for the 500 mm pack of three. ukiosks builds this display case light bar in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Alden Aluminium LED Display Case Light Bar, 500 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop