UniqueKiosk · Shenzhen workshop

Alcove White Metal Garment Rack with Wood Shelves

$460.00

White garment rack with four wood shelves, a top rail and a low base deck. Price range: USD 460-720, set by width and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Frame Layout

This white garment rack splits into two zones across a 1000 mm base. The left column carries four wood shelves, and the right side keeps a clear hanging bay. A shop hangs coats on one side and stacks folded stock on the other. A white garment rack of this width fits a corner without taking a full wall. The frame uses 25 mm square tube, so the outline reads slim from the street. Both zones share one base deck at 60 mm above the floor. Boutique white racks use this split layout.

Wood Shelves

Four shelves sit in the left column of this white garment rack at 350 mm gaps. Each shelf is a light oak veneer board on an 18 mm core. A shelf carries 12 kg, so a stack of jeans holds flat. The boards clip into the frame and a shop moves one without tools. A low deck at the base takes shoes or a stock box. A white garment rack with open boards shows the stock grain and keeps the unit light. Store display shelves list this board depth.

Hanging Rail

A single top rail runs across the right bay of this white garment rack. The rail sits at 1800 mm and carries 40 kg on wooden hangers. A shop hangs a full rail of shirts and still sees the shelf zone beside it. The rail tube is 25 mm and takes standard hanger hooks. A small end cap closes each side, so a hanger does not slide off. A white garment rack with a rail at this height suits a 1700 mm wall. Retail clothing racks share this rail gauge.

Specification Detail
Width 1000 mm
Height 1800 mm
Depth 400 mm
Shelves 4 oak veneer boards
Rail 25 mm round tube
Finish White powder coat, matte seal
Load 40 kg on the rail

Build and Finish

The tube frame is steel with a white powder coat at 60 microns. Shelves and the base deck use oak veneer over plywood with a clear matte seal. Feet sit under the base rail and hold the unit level on tile. Joints are welded, ground and coated before assembly. A white garment rack of this build stays square within 1 mm on a floor. Each unit leaves the bench after a load test on the rail and a shelf fit check. Read our bench notes for the build detail.

Shop Use

Boutiques use this white garment rack beside a fitting room and keep sizes on the shelves. A denim shop stacks jeans on the boards and hangs shirts on the rail. A pop up stall runs two units back to back and forms a small island. A showroom puts one unit at the entry and the first look reads clean. Store display racks pair with this base height. A shop with a narrow floor likes the deck, since shoes sit under the rail.

Sizes and Price

Width runs at 1000 mm, 1200 mm or 1500 mm. Height runs at 1600 mm or 1800 mm. Shelf count runs from three to five for this white garment rack. The finish comes in white, black or a light grey. A rail, a shoe deck and a set of casters are options. A shop can also add a hook bar under one shelf. List price starts at USD 460 for the 1000 mm unit. ukiosks builds this white garment rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Alcove White Metal Garment Rack with Wood Shelves”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop