
Why the US spec differs
A high end coffee bar kiosk for the US is not a Chinese kiosk with a new plug, because 208 to 240 volts at 60 hertz, NSF listing and a 36 inch counter each change the drawing. Four differences decide whether a kiosk kiosk design. The same rule holds for a Texas mall and a New York one, with the bay voltage mattering in both.
A kiosk built to a 220 V 50 Hz drawing needs a 60 Hz pump motor and a 240 V element, which is 380 glass showcases of parts and 9 days of rework. Nine days of a 3,000 dollar month is 900 shop fixtures. We keep the alternative on the same sheet, so the owner compares a certificate instead of a render.
208 to 240 volts, 60 hertz
A US mall bay feeds 208 or 240 volts at 60 hertz, and a 2 group espresso machine draws 5.5 kW at 240 V and 4.4 kW at 208 V. A 208 V bay runs the same machine at 20 percent less recovery. That number belongs on the order sheet, because a volt figure agreed verbally rarely survives a first inspection.
A 240 V 40 amp circuit costs 1,900 dollars and a 208 V 50 amp 2,200, and 300 buys the same 5.5 kW. Ask for the bay voltage before ordering, because a 208 V bay slows a boiler fixture materials. Most of these gaps appear at the 7 am rush, which is exactly when a single boiler runs flat out.

NSF and UL on the sheet
A US coffee kiosk needs an NSF mark on food contact surfaces and a UL listing on the wiring, and a kiosk without either fails a health inspection at opening. A UL listed harness costs 620 dollars and an unlisted 300. Mark it on the sheet too, so whoever fits the next kiosk has the reference without guessing. One site visit settles the question faster than a week of render browsing.
Three hundred and twenty dollars of listing is the difference between an opening date and a re-inspection, and a re-inspection costs 480 dollars plus 10 days. Ten days of a 3,000 month is 1,000 dollars. None of that shows in a picture, which is why we mark the volt and the inch on the sheet. Owners who settle it before an order pay nothing extra, and owners who settle it after delivery pay a rewire.
Four numbers on the sheet
The table is the sheet we use on US coffee bar kiosks, and each line answers a volt, a cup or a certificate rather than a mood board. The same rule holds for a Texas mall and a New York one, with the bay voltage mattering in both. We keep the alternative on the same sheet, so the owner compares a certificate instead of a render.
| Item | Number |
|---|---|
| Footprint | 12 sqm |
| Supply | 240 V, 60 Hz |
| Counter height | 36 in / 900 mm |
| Cups per hour | 90 |
| Build | $18,600 |
Thirty-six inch counter
A US kiosk counter sits at 36 inches because ADA reach is set at 48 inches maximum and a 36 inch top keeps a card reader inside it. A 42 inch counter blocks a wheelchair customer at the payment point. That number belongs on the order sheet, because a volt figure agreed verbally rarely survives a first inspection.
A 36 inch counter costs nothing extra and a 42 inch redesign 700 dollars, and 700 buys a compliant top from the start. A 36 inch top also shortens a barista reach by 150 mm across retail displays. Most of these gaps appear at the 7 am rush, which is exactly when a single boiler runs flat out.

Ninety cups from two group heads
A 2 group head machine at 25 seconds per shot delivers 90 cups an hour with one barista and a second steam pitcher. A single group head caps at 45 cups and a morning queue at 7 am stalls at 45. Mark it on the sheet too, so whoever fits the next kiosk has the reference without guessing. One site visit settles the question faster than a week of render browsing.
A 2 group machine costs 9,200 dollars and a 1 group 5,400, and 3,800 buys 45 more cups an hour. Forty-five cups at 4.2 of margin is 189 an hour, so 3,800 pays back in 20 hours cash counters. None of that shows in a picture, which is why we mark the volt and the inch on the sheet.

A beverage case at 4 C
A beverage display case holds 4 shelves at 4 C for bottled cold brew, and 4 shelves at 600 mm hold 96 bottles on a 12 sqm kiosk. Three shelves hold 72 and a Saturday sells out by 2 pm. Owners who settle it before an order pay nothing extra, and owners who settle it after delivery pay a rewire.
A 4 shelf case costs 2,850 dollars and a 3 shelf 2,300, and 550 buys 24 bottles of display. Twenty-four bottles at 3.9 of margin is 94 dollars, and 6 sell-outs of that is 550 dessert kiosk design. The same rule holds for a Texas mall and a New York one, with the bay voltage mattering in both.
Two grinders, one decaf
A US coffee kiosk runs 2 grinders with 1 dedicated to decaf, and decaf in the US runs 11 percent of drip orders. One grinder means a 40 second purge between regular and decaf. We keep the alternative on the same sheet, so the owner compares a certificate instead of a render. That number belongs on the order sheet, because a volt figure agreed verbally rarely survives a first inspection.
A second grinder costs 780 dollars and a purge 40 seconds per order, and 40 seconds on 30 decaf orders is 20 minutes a day. Twenty minutes at 4.2 a cup is 84 dollars a day against 780 once. Most of these gaps appear at the 7 am rush, which is exactly when a single boiler runs flat out.

Conclusion
Twelve square metres, 240 volts, 36 inches, 90 cups and 18,600 dollars. Five numbers food kiosk design. Mark it on the sheet too, so whoever fits the next kiosk has the reference without guessing. One site visit settles the question faster than a week of render browsing. None of that shows in a picture, which is why we mark the volt and the inch on the sheet.
Order the UL harness and the second grinder, and confirm the bay voltage. An unlisted harness fails a first inspection and a 208 V bay slows a 5.5 kW machine by 90 seconds per cycle. Owners who settle it before an order pay nothing extra, and owners who settle it after delivery pay a rewire. The same rule holds for a Texas mall and a New York one, with the bay voltage mattering in both.
Check a case at 4 C and a machine at 5.5 kW. Four degrees keeps cold brew for 5 days and 5.5 kW is what a 2 group head pulls at 240 V. We keep the alternative on the same sheet, so the owner compares a certificate instead of a render. That number belongs on the order sheet, because a volt figure agreed verbally rarely survives a first inspection.
