UniqueKiosk · Shenzhen workshop

Canopy Glass Jewelry Counter Table, Gold Legs 1.5 m

$1,180.00

A jewelry counter table with a glass canopy case on a gold frame and four tapered legs. White deck holds ring pads inside the glass. Price range: USD 950-1,350, set by case length and deck layout.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Canopy Over White Deck

A jewelry counter table usually puts the case below the counter line. This design lifts the case to the top. A glass canopy sits on a gold rail, with a white deck inside. The deck reads at 900 mm, a natural standing view. A jewelry counter with an open frame leaves the floor light. It suits a shop with two or three counters, not a full wall. The open base also keeps the stock visible from both sides. Case stock follows our glass display case build. A jewelry counter at this height also hides a small cable tray.

Gold Frame Build

The frame uses 30 mm gold steel rails around the canopy. Rails wrap the glass on all four sides and tie into an apron band. A jewelry counter needs a square case, because glass sits on the rails. Corners weld and polish, so the gold line runs unbroken. The apron sits 60 mm tall and hides the deck edge. Rails take a brushed gold coat over a sealer. Salt spray holds at 200 hours for indoor use. Rail tube comes from the fixture hardware list.

Specification Detail
Size 1500 x 600 x 950 mm
Case Glass canopy, 250 mm deep
Frame Gold steel, 30 mm rails
Deck White laminate, 60 mm below glass
Legs Four tapered gold legs, 40 mm
Base Gold slab frame at floor
Load 20 kg inside the case

Legs and Base Frame

Four tapered legs carry the top frame. Each leg tapers from 40 mm to 28 mm at the floor. A gold slab frame ties the legs at the base. A jewelry counter with a base frame keeps the legs from splaying under load. The slab also reads as a shelf line in photos. Legs set in 100 mm from the ends, so toes stay clear. Load sits at 20 kg inside the case, with no sag at mid span. Legs match the display table range.

Deck and Tray Space

The deck is white laminate, set 60 mm below the top glass. A recess takes standard ring pads at 90 by 90 mm. Six pads fit along the 1.5 m run. A jewelry counter with a recess keeps trays from sliding on a wipe down. Pads come in cream, grey or black to match the stock. The deck lifts out through the canopy for a full reset. Canopy glass is 6 mm clear with polished edges. A jewelry counter this long also fits a bridal suite desk.

Where It Sells

Jewelry shops place one counter per window. Watch rooms use two at the entrance. A jewelry counter like this also fits a hotel boutique or a duty free bay. The 600 mm depth keeps the serve aisle at 900 mm. Our display counters range covers enclosed cases. Add a ring display pad set for the deck. A jewelry counter at this length also fits a small watch window.

Open Line, Closed Case

The open base makes a small shop feel larger. The canopy keeps rings enclosed and dust free. Gold rails match warm jewelry interiors. A jewelry counter of this build also ships with the glass in a separate crate. Four bolts join the top frame to the legs on site. List price starts at USD 1,180 for the 1.5 m table. ukiosks can change canopy depth, leg profile and deck layout. Send your tray count to our team for a fit check.

Reviews

There are no reviews yet.

Be the first to review “Canopy Glass Jewelry Counter Table, Gold Legs 1.5 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop