UniqueKiosk · Shenzhen workshop
Amber Clear Acrylic Pegboard Bin, 190 mm
$14.00
Pegboard bin in clear acrylic with a hooked back tab, sold as a single unit. Price range: USD 14-38, set by bin depth and pack size.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Bin and Hook
This pegboard bin runs 190 mm deep and 150 mm wide. A pegboard bin of this size holds about 30 small parts. The back tab hooks into a 6 mm hole, so the bin hangs without a screw. The front wall slopes at 35 degrees, so a part reads from the aisle. The base sits flat at 6 mm, so a bin takes a load without a sag. A bin holds 4 kg of small goods. A retail display board uses this bin.
Acrylic Build
The body is 3 mm clear acrylic, bent on a hot line. A pegboard bin in this gauge keeps a clear face after a wipe. The edges polish, so no cut line shows at the rim. The tab bends in one press, so each bin hooks the same. The base joins the walls with a solvent bond, so a bin holds water without a leak. A dry cloth clears a dust line from the face.
Wall Set
A pegboard bin of this depth fits a 25 mm pitch board. A shop sets a row at 200 mm centres, so a parts line reads even. The bin hangs at 1200 mm for a reach line and 1600 mm for a browse line. A staff sets a row of twenty bins in about eight minutes. A bin lifts off by hand, so a reset takes no tool. A label strip sits on the bin face as an option. Our store fixture wall shares this pitch.
| Specification | Detail |
|---|---|
| Depth | 190 mm |
| Width | 150 mm |
| Acrylic | 3 mm |
| Front Slope | 35 degrees |
| Load | 4 kg |
| Finish | Clear |
| Weight | 0.3 kg |
Shop Use
A hardware shop sets this pegboard bin on a parts wall. A craft shop uses a row for beads and findings. A bike shop uses one for bolts and caps. A trade show uses a row at a booth. Shelving of this build pairs with a pegboard panel. A panel of 600 mm holds three bins at this pitch. A wire grid display panel takes the same hook.
Build Notes
The sheet is cut on a laser, then bent on a hot line. A pegboard bin of this build keeps a square corner after a move. The tab is bent on a jig, so the hook depth stays true. The rims are flame polished by hand. Each bin is checked for a level base and a straight tab before packing. Read our bench notes for the hot bend.
Sizes and Price
Depth runs at 150, 190 or 250 mm for this pegboard bin. The width runs at 100, 150 or 200 mm. The material comes as clear, white or black acrylic. The pack runs as a single, a five or a ten. A divider, a label strip and a mounting bar are options. List price starts at USD 14 for the 190 mm bin. ukiosks builds this pegboard bin in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.