UniqueKiosk · Shenzhen workshop

Foundry Steel Rack with Twin Glass Shelf Bays

$940.00

Raw steel rack with two glass shelf levels, an open hang bay and a white deck base. Price range: USD 940-1,320, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Twin Glass Shelves

Two clear glass shelves sit near the top of this steel rack. The shelves run 350 mm pitch and take a folded stack or a box row. A shop sets a colour run on the low shelf and the stock pack above. The clear glass also lets the light pass and keeps the frame open. This steel rack suits a knit bay or a footwear corner. Display shelves list this shelf pitch.

steel rack

Open Hang Bay

An open bay runs below the shelves of this steel rack. The bay stands 1000 mm high and takes a short hang line at 1200 mm. A shop keeps the bay open, so a shopper reads the full sleeve and the hem. The bay also lets a staff member restock from the side without a step. Clothing racks use this bay height.

steel rack front view

White Deck Base

A white deck closes the base of this steel rack. The deck runs 400 mm deep and takes shoe pairs or a folded denim stack. A shop sets the deck at 120 mm, so the base reads light under a spot. The deck of this steel rack also ties the four posts and holds the frame square. A wide deck also keeps a boot pair clear of the frame post. Display racks share this deck depth.

steel rack side view

Shop Use

This steel rack fits a boutique, a denim wall or a studio floor. The twin shelves carry the stock and the open bay carries the hero line. A shop sets the unit 500 mm from a wall and keeps 900 mm clear in front. The raw steel face reads cool under a 4000 K lamp. Retail displays fixtures fit the same floor.

Load And Care

Each glass shelf holds 20 kg on this steel rack, and the deck holds 30 kg spread. Keep the heavy box on the low shelf, since the glass spans 500 mm. A loaded shelf stays level within 1 mm across its width. Wipe the glass with a soft cloth and a mild cleaner, then dry the steel face. Check the shelf bolts after a month, since a loose bolt lets the glass shift. Read more about our bench on our foundry builds.

glass shelf bracket

Size Options

Width runs at 1000 mm or 1200 mm on request. Height runs at 2000 mm or 2200 mm. A third shelf can replace the top frame bar. A hangbar can also join under the low shelf of this steel rack. The deck comes in white, grey or an oak veneer. List price starts at USD 940 for the 1000 mm unit. ukiosks builds this steel rack in Shenzhen to order, so send your bay plan through contact us.

Specification Detail
Width 1000 mm
Height 2000 mm
Depth 450 mm
Shelves 2 clear glass
Deck White, 400 mm deep
Load 20 kg shelf, 30 kg deck
Finish Raw brushed steel

Reviews

There are no reviews yet.

Be the first to review “Foundry Steel Rack with Twin Glass Shelf Bays”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop