UniqueKiosk · Shenzhen workshop
Cradle Frame Clothing Rack with Twin Shelf Plates
$318.00
Frame clothing rack with one shelf under the top bar, one lower shelf and a plate base. Price range: USD 318-440, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Shelf Under Bar
A flat plate sits 200 mm under the top bar of this clothing rack. The plate runs the full width. A shop sets a hat box or a folded stack above the hang line of this clothing rack. The top bar carries a short hanging drop below the plate. A shop uses the drop for two signature pieces. The plate also gives the frame a closed top edge. Display racks list this plate.
Lower Shelf
A second plate sits at 900 mm on this clothing rack. The plate runs 600 mm deep, so a shoe box fits flat. A shop sets folded denim on the lower plate and hangs jackets above. The plate edge folds down 25 mm. This edge keeps the board straight under a stacked load on this clothing rack. Retail displays fixtures share this plate bracket.
Plate Base
A steel plate closes the floor line of this clothing rack at 50 mm. The base spreads the load on four welds, so the frame stands without a wall strap. A shop sets a basket on the base and keeps the shelves for stock. The base also lets staff slide the unit for a reset. Clothing racks list this plate base.
Shop Fitting
The clothing rack suits a compact boutique, a hotel wardrobe bay or a showroom corner. The stack of plates shows stock at three heights. A shop sets this clothing rack beside a fitting mirror and a low bench. This pairing keeps the bay narrow. The closed top also hides a stock box on the upper plate. Countertop displays fit the same bay.
Load And Care
Each shelf plate holds 30 kg and the base plate 40 kg on this clothing rack. Keep the heavy stock on the base, since the upper plate sits on a lighter bracket. A loaded frame stays level within 2 mm across the base. Check the plate brackets after a month, since a loose bracket lets a plate dip. Wipe the plates and avoid a wet mop on the welds. Read more about our bench on our plate frames.
Size Options
Width runs from 800 mm to 1100 mm on request. Height runs at 1700 mm or 1850 mm. A shop can add a third plate at 1300 mm. The plates can also swap for a marble board. The finish also comes in chalk white or oxide grey. List price starts at USD 318 for the 900 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1750 mm |
| Frame | 22 mm square steel |
| Plates | 3, including base |
| Depth | 600 mm |
| Load | 30 kg plate, 40 kg base |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.