UniqueKiosk · Shenzhen workshop
Wedge Acrylic Leaflet Holder Stand
$65.00
Clear acrylic leaflet stand with a slanted back panel and a front lip, 150 mm wide and 230 mm tall on a 180 mm base. Price range: USD 65-110, set by width and thickness.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Wedge Body Shape
A slanted back panel gives this brochure holder its wedge form. Two triangular side panels carry the load and close the ends. The back leans at about 20 degrees, so a sheet rests against it. A front lip of 40 mm stops the sheet from sliding out. The base runs 180 mm deep and 150 mm wide. The open top lets staff drop in a sheet from above. This brochure holder holds one title at a time, clearly.
Cast Sheet Finish
Cast acrylic of 4 mm builds the body of this brochure holder. A thick sheet keeps the wedge flat after heat bending. Edges are flame polished, so a printed cover reads through without haze. Joints use solvent cement at the side panels, which leaves a thin clear line. A scratch pad restores a dull face after a season. The sheet takes a wipe with water and a soft cloth. This brochure holder holds clarity under a window light.
Desk And Shelf Fit
A 180 mm base keeps this brochure holder steady on a desk. The unit weighs about 700 g, so a clerk carries it in one hand. A wedge face reads from a standing shopper and from a seated visitor. The open top takes a sheet in one push. A paid counter, a clinic desk and a hotel stand suit the shape. A spare unit sits on a second floor. Our literature displays cover a taller version.
Print Placement
A logo fits on the front lip of this brochure holder in small type. A larger print sits on the back panel, read through the acrylic from the front. We reverse print, so a buyer reads the text in the right direction. A colour band along the lip edge marks a department. A printed insert sits behind the sheet for a short campaign. A plain clear stand ships as standard. A retail sign holder uses the same print file. Our acrylic displays list both print routes.
Where It Reads
A single sheet stand suits a menu point, a price card and a leaflet spot. One title per stand keeps a message simple. Staff change the sheet in seconds, so a daily menu works. A clear body does not block the counter surface under it. A row of three stands holds a leaflet set. A small footprint fits a narrow service point. Our countertop easels cover a smaller format.
Price And Custom Build
List price starts at USD 65 for this clear leaflet stand at 150 mm width. A 210 mm wide unit with a printed lip lands near USD 92. A leaflet stand holds one sheet at a fixed reading angle. A 4 mm sheet keeps the wedge flat through a season. A polished edge keeps a colour cover sharp. This brochure holder pairs with countertop displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset sheet width, slant angle, lip height and print layout. Send your sheet size and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Overall size | 150 x 180 x 230 mm |
| Sheet capacity | One A5 or A4 folded sheet |
| Material | 4 mm cast acrylic, clear |
| Slant angle | About 20 degrees |
| Front lip | 40 mm high |
| Edge finish | Flame polished |
| Weight | About 700 g |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.