UniqueKiosk · Shenzhen workshop
Cookie Counter in White Wood With Glass Case and Sink
$2,600.00
White washed wood bakery counter with a stone look work top, stainless sink, open shelf bays and a glass display case, sized 4.4 x 1.0 m. Price range: USD 600-2,500, set by length and case size.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
White Wood Counter Run
White washed wood faces this bakery counter along its whole length. Boards run vertical on the case blocks and horizontal on the long low run. The finish is a light stain with a matte seal, so it never looks grey. Low bays hold cookie boxes and cubby shelves on 400 mm centres. The run stands 900 mm high, with a 60 mm shadow gap below. Transitions between bays use a straight joint, so lines stay sharp. This bakery counter suits a corner shop front. The food and drinks floor plan fits it along one wall.
Stone Top and Sink
A grey stone look top runs the full length at 20 mm thick. It is compact laminate on a ply core, so it takes weight without sagging. A stainless sink sits at the middle, 500 mm wide, with a mixer tap. A drain board runs 300 mm either side. The top holds trays, scales and packing sheets. Cookies cool on the top of this bakery counter before boxing. Every bakery counter needs a washing point this close to the packing line. Wipe down takes one cloth pass on this finish.
Shelf Bays and Glass Case
White shelf bays rise behind the sink run, 1,100 mm above the top. Three lines hold jars, canisters and tins. Bays are 300 mm deep, so tall tins still clear the wall. A glass display case sits at the right end, 900 mm by 600 mm. The case has two shelves and a lit inner face. Lids, labels and bags go under the case top. This bakery counter keeps packing stock behind glass. display cases of the same size can replace the case in one bay.
Build and Finishing
Carcass parts are 18 mm ply with a sealed core. White washed faces are stained, then sealed twice. The top is glued and edge trimmed in the shop. Sink bowls are pressed stainless, welded to the top strip. Glass in the case is 5 mm tempered. Every bakery counter is assembled once in the workshop before crating. cash counter drawers can replace one low cubby bay. countertop cases cases fit the free top when a shop needs a second display point.
Fit and Delivery
The run measures 4.4 m by 1.0 m. The top sits at 900 mm and the bays rise to 2.0 m. It suits shop floors with a 1.2 m walkway behind. Weight lands near 260 kg across three crates. Sections join at the bay line with cam locks. Site work is levelling the plinth, then locking bays and setting the top. Sink plumbing is done on site by the fitter. Two people need about five hours. retail display fixtures clearance rules apply at the case end.
Price and Custom Build
A washing point inside the counter saves a walk to the back room. Open bays sell tins and boxes without a key. White wood hides flour dust better than gloss white. List price starts at USD 2,600 for the 4.4 m run. A shorter bakery counter at 3.0 m lands near USD 1,900. ukiosks builds this bakery counter to order in Shenzhen. We can reset run length, sink position, bay count and case size. Send your plan and we return drawings and a quote. Nearby coffee fit-outs counters and food and drink fit outs use the same bay module.
| Specification | Detail |
|---|---|
| Overall size | 4.4 x 1.0 x 0.9 m (custom 3.0-5.4 m) |
| Body | White washed wood on 18 mm plywood |
| Work top | 20 mm stone look compact laminate |
| Sink | Stainless bowl with mixer tap and drain board |
| Shelf bays | Three lines, 300 mm deep |
| Display case | Glass case, 900 x 600 mm, two shelves |
| Packing | Three crates, about 260 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.