UniqueKiosk · Shenzhen workshop

Smoothie Station Kiosk in Wood Veneer With Screen Panels

$12,000.00

Wood veneer smoothie kiosk with two tall screen panels, stainless sink run and a lit fruit window bank, sized 3.0 x 1.4 m for narrow mall plots. Price range: USD 9,000-15,000, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Twin Screen Panels

Two tall wood panels stand at each end of this juice kiosk. Each panel holds a dark screen at eye height for menus. Panels run 300 mm wide and 2.2 m tall. They frame the counter and break the long front line. Wood veneer is sealed twice, since fruit steam sits low. Small plant boxes cap the panel tops. Screens are fixed with a steel bracket, not glue. Cables drop through a channel to the counter run, like every retail display fixtures panel we build.

wood veneer juice station

Counter and Sink Run

The counter runs 3.0 m, with a stainless top at 950 mm. A juicer sits at the left end over a drip tray. A single sink and drainer take the middle of the run. Glass guards sit on the back edge, 150 mm high. A rail above holds a row of sample cups. Two open bays below take crates and paper stock. This juice kiosk keeps wet work at the sink end only. Retail display cases use the same top height when you add a cold case.

juice kiosk front elevation

Fruit Windows and Lighting

Four fruit windows sit in the front wood panel, each 350 mm wide. Boxes are lined in pine and lit by two spots each. The windows sit at 700 mm height, under the counter overhang. Fruit sits in loose trays, so staff swap stock fast. A slim LED strip runs above the windows. Light reflects on the white panel band above. A juice kiosk with lit windows sells faster. countertop cases can sit on the same top if you add cold fruit.

juice kiosk side profile

Materials and Joinery

Bodies are 18 mm plywood with a wood veneer face. Veneer is pressed, sanded and sealed, then sealed again. White bands are spray finished, not wrapped. Counter steel is 1.2 mm, folded not welded at corners. Frames inside the panels are steel angle for stiffness. Glass is 5 mm tempered with polished edges. A juice kiosk of this build runs a full dry fit in the shop. Parts carry section marks before packing.

lit fruit window boxes

Plot Size and Delivery

The plan measures 3.0 m by 1.4 m, with height at 2.2 m. A narrow footprint like this suits corridor plots in malls. Weight lands near 240 kg, packed in two crates. Sections ship upright, glass boxed apart. Site work is setting panels, then dropping the counter top. Two people finish in about six hours. One juice kiosk this size needs a 16 A circuit for spots and screens. Made to order sizes run from 2.4 m to 3.4 m.

Price and Custom Work

Two screen panels do the job of a printed menu board. Wood veneer hides fingerprints better than gloss white. The fruit windows pull people in from the aisle line. List price starts at USD 12,000 for this juice kiosk. The 2.4 m juice kiosk version drops to about USD 10,800. ukiosks builds this juice kiosk to order in Shenzhen. We can change panel width, screen size, veneer tone and window count. Send your plan and we return drawings, sections and a quote. Related service counters and food and drinks fits share the same frame parts.

Specification Detail
Overall size 3.0 x 1.4 x 2.2 m (custom 2.4-3.4 m)
Panel frame Wood veneer on 18 mm plywood
Screen panels Two 300 mm panels with menu screens
Counter top 1.2 mm stainless steel
Fruit windows Four lit pine boxes, LED spots
Glass 5 mm tempered guards
Packing Two crates, about 240 kg

Reviews

There are no reviews yet.

Be the first to review “Smoothie Station Kiosk in Wood Veneer With Screen Panels”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop