
Four backings, four bills
A showcase back panel is painted, laminated, veneered or backlit, and the 4 finishes differ by 3 dollars a sqm on a quote and by 9 years of life in a mall. Choose on the second number. We keep the alternative on the same sheet, so the owner compares a year instead of a swatch. That number belongs on the backing sheet, because a finish agreed verbally rarely survives a first wipe-down.
A painted back costs 38 dollars a sqm and a laminate 62, and a 6 sqm cabinet is 228 against 372. A painted back at 3 coats holds colour 6 years where a laminate fixture materials. Most of these issues appear under 300 lux, which is exactly when a 30 unit satin shows a handprint. Mark it on the sheet too, so whoever sprays the next panel has the reference without guessing.
Three coats, 24 hours
A painted back needs a primer and 2 top coats at 24 hours between each, and 72 hours of drying is what keeps a matte finish from print marks. A 1 coat back prints in 2 weeks. One site visit settles the question faster than a week of sample browsing. None of that shows in a photo, which is why we write the gloss unit and the coat count on the sheet.
A 3 coat spray costs 38 dollars a sqm and a 1 coat 22, and 16 dollars buys 2 extra coats. A 1 coat back re-sprays at 380 a cabinet inside 6 months, which is shop fixtures. Owners who settle it before an order pay nothing extra, and owners who settle it after a print mark pay a re-spray.

Sheen at 5 to 30 units
A matte paint at 5 gloss units hides a finger mark and a satin at 30 shows it, and 30 units on a back panel reads a handprint under 300 lux. A 5 unit matte needs a 3 coat build. The same rule holds for a Shenzhen cabinet and a London one, with the 40 mm gap mattering in both.
A 5 unit matte costs 4 dollars a sqm more than a 30 unit satin and a daily wipe costs 12 a month. Four dollars per sqm against 144 a year of wiping is the matte argument counters and towers. We keep the alternative on the same sheet, so the owner compares a year instead of a swatch. That number belongs on the backing sheet, because a finish agreed verbally rarely survives a first wipe-down.

Four numbers on the sheet
The sheet compares 4 backings on the same cabinet, and each line answers a year, a gloss unit or a percent retail displays. Most of these issues appear under 300 lux, which is exactly when a 30 unit satin shows a handprint. Mark it on the sheet too, so whoever sprays the next panel has the reference without guessing. One site visit settles the question faster than a week of sample browsing.
| Backing | Life / cost |
|---|---|
| Paint, 3 coats | 6 years, 38/sqm |
| Laminate | 10 years, 62/sqm |
| Veneer | 8 years, 96/sqm |
| Backlit panel | 7 years, 128/sqm |
| Gloss units | 5 matte |
Veneer at 96
A veneer back at 96 dollars a sqm shows a 0.6 mm oak face and needs a 18 mm plywood core, and a veneer on chipboard splits at a joint in 18 months. Plywood display cases. None of that shows in a photo, which is why we write the gloss unit and the coat count on the sheet. Owners who settle it before an order pay nothing extra, and owners who settle it after a print mark pay a re-spray.
A veneer on plywood costs 96 and on chipboard 78, and 18 dollars buys a face that does not split. A split face on a 6 sqm back is a 640 re-face, which is 35 of the 18 dollar step. The same rule holds for a Shenzhen cabinet and a London one, with the 40 mm gap mattering in both.

Backlit at 128
A backlit panel at 128 dollars a sqm puts 300 lux through a 3 mm acrylic face and needs a 40 mm air gap behind, and a 40 mm gap keeps an LED at 31 degrees. A 20 mm gap reaches 44 degrees. We keep the alternative on the same sheet, so the owner compares a year instead of a swatch.
A 40 mm gap costs 0 and a re-lamp of a 6 sqm panel 210, and 44 degrees cuts a strip life from 50,000 to 28,000 hours. Forty-four percent of life is the whole cash counters. That number belongs on the backing sheet, because a finish agreed verbally rarely survives a first wipe-down. Most of these issues appear under 300 lux, which is exactly when a 30 unit satin shows a handprint.

Conclusion
Thirty-eight, 62, 96, 128 and 5 gloss units. Four backings and one sheen settle cosmetic kiosk. Mark it on the sheet too, so whoever sprays the next panel has the reference without guessing. One site visit settles the question faster than a week of sample browsing. None of that shows in a photo, which is why we write the gloss unit and the coat count on the sheet.
Paint on a 6 year lease, laminate on a 10 year one, veneer only on plywood. The 4 dollar matte and the 40 mm gap cost nothing per year and save a 380 and jewellery display cases. Owners who settle it before an order pay nothing extra, and owners who settle it after a print mark pay a re-spray. The same rule holds for a Shenzhen cabinet and a London one, with the 40 mm gap mattering in both.
Check a backing at 3 coats and a gap at 40 mm. Three coats hold colour 6 years and 40 mm keeps an LED at 31 degrees instead of 44. We keep the alternative on the same sheet, so the owner compares a year instead of a swatch. That number belongs on the backing sheet, because a finish agreed verbally rarely survives a first wipe-down.
