
Four stages in Shenzhen
A display fixture passes 4 stages in Shenzhen: a 2 hour panel cut, a 1 mm edge band, a 16 hour spray cure and a 500 km crate test. Skip one stage and a shop sees it mall kiosk layout. Owners who settle it before a deposit pay nothing extra, and owners who settle it after a crate pay a re-spray. The same rule holds for a Shenzhen order and a London one, with the cure line mattering in both.
A 4 stage factory ships a 12 m run in 18 days and a 3 stage in 12, and 6 days of difference costs 240 dollars of a shop rent. A 1 mm band saves a 320 re-finish on site. We keep the alternative on the same sheet, so the owner compares a stage instead of a reputation. That number belongs on the quote sheet, because a millimetre agreed verbally rarely survives a crate.
Two hours of panel cut
A 12 m fixture run uses 46 panels of 18 mm ply and a CNC router cuts 46 panels in 2 hours at 24 a panel, and a hand saw takes 9 hours. A 2 hour cut holds a 0.3 mm tolerance. Most of these faults appear on a first delivery, which is exactly when a 0.6 mm band shows a line. Mark it on the sheet too, so whoever runs the next fixture has the reference without guessing.
A CNC hour costs 60 dollars and a hand saw hour 22, so 2 hours is 120 and 9 hours 198. A 0.3 mm tolerance saves a 40 dollar re-cut per panel on 46, which is 1,840 shop fixtures. One factory visit settles the question faster than a week of sample requests. None of that shows in a sample, which is why we mark the hours and the band on the sheet.

A one millimetre band
A 1 mm edge band at 0.4 mm radius hides a ply edge and a 0.6 mm band shows a line on a 900 lux counter, and a band line on 46 panels is 46 lines. A 1 mm band runs at 18 m a minute. Owners who settle it before a deposit pay nothing extra, and owners who settle it after a crate pay a re-spray.
A 1 mm band costs 0.9 dollars per metre and a 0.6 band 0.6, and 0.3 buys fixture materials. A re-finish on site costs 320 dollars for a 12 m run, which is 355 metres of a 0.3 step. The same rule holds for a Shenzhen order and a London one, with the cure line mattering in both. We keep the alternative on the same sheet, so the owner compares a stage instead of a reputation.

Four numbers on the sheet
The sheet is what we quote a Shenzhen fixture with, and each line answers an hour, a millimetre or a day rather than retail displays. That number belongs on the quote sheet, because a millimetre agreed verbally rarely survives a crate. Most of these faults appear on a first delivery, which is exactly when a 0.6 mm band shows a line.
| Stage | Number |
|---|---|
| Panel cut | 2 hours, 46 panels |
| Edge band | 1 mm at 0.4 radius |
| Spray cure | 16 hours at 22 C |
| Crate drop | 500 km, 4 g |
| Lead time | 18 days |
Sixteen hours of cure
A 2 pack polyurethane needs 16 hours at 22 degrees before a panel is stacked and a 6 hour cure marks cosmetic kiosk. A 16 hour cure on 46 panels takes 2 racks counters and towers. Mark it on the sheet too, so whoever runs the next fixture has the reference without guessing. One factory visit settles the question faster than a week of sample requests.
A 16 hour cure costs 320 dollars of a rack day and a 6 hour 120, and 200 buys a mark free panel. A crate mark on 4 panels costs a 180 re-spray each, which is 720 against 200. None of that shows in a sample, which is why we mark the hours and the band on the sheet. Owners who settle it before a deposit pay nothing extra, and owners who settle it after a crate pay a re-spray.

Five hundred kilometres
A 12 m run ships 500 km to a mall and a crate at 4 g protects a 0.4 mm glass edge, and a 2 g crate breaks 1 case in 12. A 4 g crate costs 36 dollars a case. The same rule holds for a Shenzhen order and a London one, with the cure line mattering in both. We keep the alternative on the same sheet, so the owner compares a stage instead of a reputation.
A 4 g crate costs 36 dollars a case and a 2 g 18, and 18 buys a 0.4 mm edge. One broken case at 640 dollars on 12 cases is 53 a case, which is 3 times display cases. That number belongs on the quote sheet, because a millimetre agreed verbally rarely survives a crate. Most of these faults appear on a first delivery, which is exactly when a 0.6 mm band shows a line.

Conclusion
Two hours, 1 mm, 16 hours and 500 km. Four stages settle glass showcases. Mark it on the sheet too, so whoever runs the next fixture has the reference without guessing. One factory visit settles the question faster than a week of sample requests. None of that shows in a sample, which is why we mark the hours and the band on the sheet.
Cut 46 panels in 2 hours and band at 1 mm. A 120 CNC cut and a 36 dollar crate protect 1,840 of re-cut and 53 a case of breakage. Owners who settle it before a deposit pay nothing extra, and owners who settle it after a crate pay a re-spray. The same rule holds for a Shenzhen order and a London one, with the cure line mattering in both.
Check a band at 1 mm and a cure at 16 hours. One millimetre hides a ply edge and 16 hours keeps a 2 pack finish from marking in a crate. We keep the alternative on the same sheet, so the owner compares a stage instead of a reputation. That number belongs on the quote sheet, because a millimetre agreed verbally rarely survives a crate.
