
Five numbers a cabinet answers
A computer display cabinet is judged on 5 numbers: a 400 mm a screen height, a 1,100 lux a face light, a 8 degree a tilt, a 2.4 m a run and a 43 percent a cable gap. A cabinet that misses 2 hides a screen and snaps a hinge. That number belongs on a cabinet sheet, because a rack height agreed verbally rarely survives a hinge order.
A 400 mm screen height under 1,100 lux on an 8 degree tilt inside a 2.4 m run leaves a 43 percent cable gap, so a number decides a cabinet technology kiosk. Most of these glares appear at a 20 degree tilt, which is exactly where 8 shows. Mark it on the sheet too, so whoever fits the next cabinet has the reference.
Raise a screen to 400 mm and light 1,100 lux
A 400 mm height shows a keyboard and a 250 mm hides it, and a face runs 1,100 lux. A cabinet holds 6 units. One cable measured at the back settles the question faster than a month of email. None of that shows in a photo, which is why we print the numbers on a sheet. Brands who read a sheet pay nothing extra, and brands who skip it pay a swap.
A 400 mm riser costs 60 a bay and a 250 mm 30, and 30 buys 150 mm. A 250 mm riser hides a keyboard at 1 in 3 bays and a hidden unit costs 25 of a lift, which is counters and towers The same rule holds for a Shenzhen showroom and a Dubai one, with the cable gap mattering in both.

Tilt 8 degrees inside a 2.4 m run
An 8 degree tilt reads a screen and a 20 degree glares, and a run spans 2.4 m. A shop lays 4 runs. We keep the number on the same sheet, so a brand compares a lux reading instead of a photo. That number belongs on a cabinet sheet, because a rack height agreed verbally rarely survives a hinge order. Most of these glares appear at a 20 degree tilt, which is exactly where 8 shows.
An 8 degree hinge costs 18 a unit and a 20 degree 9, and 9 buys 12 degrees. A 20 degree tilt glares at 1 in 4 runs and a glare costs 40 of a re-set, which is fixture materials Mark it on the sheet too, so whoever fits the next cabinet has the reference. One cable measured at the back settles the question faster than a month of email.

Four numbers on a cabinet sheet
The sheet is what a brand and a shopfitter both sign, and each line answers a millimetre, a lux or a degree shop fixtures. None of that shows in a photo, which is why we print the numbers on a sheet. Brands who read a sheet pay nothing extra, and brands who skip it pay a swap. The same rule holds for a Shenzhen showroom and a Dubai one, with the cable gap mattering in both.
| Number | Value |
|---|---|
| Screen height | 400 mm |
| Face light | 1,100 lux |
| Tilt | 8 degrees |
| Run | 2.4 m |
| Cable gap | 43 percent |
Leave a 43 percent cable gap
A 43 percent gap cools a unit and a 15 percent cooks it, and a run holds 24 cables. A shop runs 4 runs a floor. We keep the number on the same sheet, so a brand compares a lux reading instead of a photo. That number belongs on a cabinet sheet, because a rack height agreed verbally rarely survives a hinge order.
A 43 percent gap costs 12 a bay and a 15 percent 4, and 8 buys 28 points. A 15 percent gap overheats a unit at 1 in 5 bays and a heat costs 80 of a swap, which is retail displays Most of these glares appear at a 20 degree tilt, which is exactly where 8 shows. Mark it on the sheet too, so whoever fits the next cabinet has the reference.

Check 96 cables on 1 pass
A cable pass reads a gap and a tilt and takes 50 minutes, and a floor runs 96 cables. A year passes 4 times. One cable measured at the back settles the question faster than a month of email. None of that shows in a photo, which is why we print the numbers on a sheet. Brands who read a sheet pay nothing extra, and brands who skip it pay a swap.
A pass costs 0 and a skip 0, and 0 buys 50 minutes. A skipped pass leaves a 15 percent gap at 1 in 4 shops and a swap costs glass showcases is retail displays The same rule holds for a Shenzhen showroom and a Dubai one, with the cable gap mattering in both. We keep the number on the same sheet, so a brand compares a lux reading instead of a photo.

Conclusion
Four hundred, 1,100, 8, 2.4 and 43. Five numbers keep a cabinet a cabinet. That number belongs on a cabinet sheet, because a rack height agreed verbally rarely survives a hinge order. Most of these glares appear at a 20 degree tilt, which is exactly where 8 shows. Mark it on the sheet too, so whoever fits the next cabinet has the reference. One cable measured at the back settles the question faster than a month of email.
Ask for a rack drawing and a lux reading. A 60 riser and an 18 hinge protect 150 a bay and 160 a shop. None of that shows in a photo, which is why we print the numbers on a sheet. Brands who read a sheet pay nothing extra, and brands who skip it pay a swap. The same rule holds for a Shenzhen showroom and a Dubai one, with the cable gap mattering in both.
Read a rack drawing before a showroom photo. A 400 mm riser and an 8 degree tilt keep a screen a screen, mall kiosk layout. We keep the number on the same sheet, so a brand compares a lux reading instead of a photo. That number belongs on a cabinet sheet, because a rack height agreed verbally rarely survives a hinge order.
