UniqueKiosk · Shenzhen workshop

Vertical Glass Tower Case with Five Shelves

$780.00

Black frame tower display case with five glass shelves, a pale deck plate and one base drawer. Price range: USD 780-1,180, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Black Frame Tower

A black steel frame carries this display case at four corners. The frame runs 25 mm square and 2000 mm tall, with clear glass on four sides. A shop sets the tower against a pale wall and the dark frame draws the eye. The frame also takes a slim top rail, so the glass top sits flush. Display cases list this frame size. A tall tube also keeps the shelves visible from a doorway.

Five Glass Shelves

Five clear glass shelves divide this display case at 320 mm pitch. Each pane carries a clear edge. Each shelf takes an 8 mm tempered pane with a polished front edge. A shop sets a boxed item on the top shelf and a light item below. The shelf of this display case clips into the side rails, so the pitch changes in minutes. Display shelves use this shelf gauge. A dry shelf also takes a quick dust each week.

Drawer Base

One black drawer closes the base of this display case at 350 mm high. The drawer runs 500 mm wide on a ball bearing slide and takes a 100 mm depth. A shop keeps the tags, the tissue and the cleaning cloth inside. The pale deck plate above the drawer also lifts the stock off the black base. Countertop displays share this drawer depth. A shallow drawer also keeps a flat wallet from sliding.

Where It Fits

This display case fits a boutique corner, a hotel lobby or a watch bar. The 550 mm footprint lets four units sit in a row with even gaps. A shop sets the row 500 mm off a wall and keeps the aisle at 900 mm. A black tower also reads sharp under a white ceiling. Retail displays fixtures fit the same row. A tall case also takes a price card on the top rail.

Load and Care

Each shelf of this display case holds 14 kg and the drawer holds 20 kg. Keep a heavy item on the low shelf, since a slim pane bows under a point load. The tower stays plumb within 1 mm when the frame sits level. Wipe the glass with a soft cloth and water only, and dust the frame rail each month. Check the shelf clips each quarter, since a loose clip lets a pane slip. Read more about our bench on our tower builds.

Size Options

Width runs at 550 mm or 700 mm on request. Height runs at 2000 mm or 2200 mm. A shop can order two drawers in place of one, a lock on the drawer, or a mirrored back. The frame also comes in satin white or brushed brass. List price starts at USD 780 for the 550 mm unit. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Width 550 mm
Height 2000 mm
Depth 450 mm
Shelves 5 tempered glass
Base 1 drawer, ball bearing
Frame Black steel, 25 mm
Load 14 kg shelf, 20 kg drawer

Reviews

There are no reviews yet.

Be the first to review “Vertical Glass Tower Case with Five Shelves”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop