UniqueKiosk · Shenzhen workshop

Verge Black Glass Island Display Case, 1200 mm

$980.00

A four-sided glass island display case in a black steel frame, with two glass shelves and a lit white base. Price range: USD 700-1,500, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Four-Sided Glass Box

This glass display case shows stock from the front, both ends and the top. A black steel frame holds four glass faces and two inner shelves. The front panel slides open on a track. A perforated header panel rises above the top. That shape lets a shopper walk around the unit. A tall glass display case also keeps small stock above waist height. A glass display case open on all sides works best on an island, not against a wall.

Frame and Glazing

The frame is 2 mm steel plate and 20 x 20 mm tube, powder coated matte black. Glass is 5 mm tempered with polished edges. Shelves are 6 mm tempered and sit on steel brackets. The base deck is white back-painted glass with an LED strip under it. Total load is 30 kg per shelf. Bracket spacing follows the same logic as retail shelving bays. A glass display case needs that headroom for phones, watches and boxed stock.

Lighting and Access

The base LED runs at 4000 K and lifts the whole box from below. Shelf brackets leave a 30 mm gap, so light travels up the glass. The header panel takes a printed graphic or a plain finish. The sliding door has a cam lock at the end. Staff reach every shelf from the open front. A glass display case set up this way needs no extra spotlights. A second strip can be added under each shelf on request.

Specification Detail
Dimensions 1200 x 600 x 1600 mm
Frame 2 mm steel plate, matte black powder coat
Glass 5 mm tempered, 4 sides
Shelves 2 glass, 6 mm, 30 kg each
Lighting 4000 K LED base, 12 V driver
Door sliding front panel with cam lock
Weight 85 kg empty

Where It Stands

Phone shops place this glass display case on the open floor between aisles. Jewellery brands use it for a feature run. Museum rooms take it for small objects. A glass display case with a lit base reads well under low shop light. Two units side by side make a 2.4 m island. Keep 900 mm clear on the door side, and check store display planning before the floor is marked. Pair it with display cases when a wall run is also needed.

Delivery and Setup

The case ships in one crate with the glass packed separately. Assembly takes about 40 minutes with two people. Levelling feet adjust by 15 mm under the plinth. One 12 V driver feeds the base light. Weight is 85 kg empty. Move it on a pallet truck. A glass display case this size should be levelled before the glass goes in. Ask about install support through the contact page.

Cost and Custom Build

One island case turns a walk-through point into a selling point. Stock sits at eye level on two shelves. The lit base does the work of a spotlight. Cleaning means glass spray and a cloth. That is the whole store operations routine for this unit. List price starts at USD 980 for the 1200 mm unit. Ukiosks builds this glass display case in any width, height and frame colour. Our team quotes from a drawing. See countertop displays for small formats, or send sizes through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Verge Black Glass Island Display Case, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop