UniqueKiosk · Shenzhen workshop

Three Tier Merchandising Table with Gold Legs, 1200 mm

$780.00

A merchandising display table with three stepped white tops on gold square tube legs. Price range: USD 400-1,200, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Three Stepped Tops

This merchandising display table steps three white tops back in a row. The front top sits lowest, and each top behind rises by about 150 mm. A bag on the back top reads above a bag at the front. The whole range then shows from the aisle. Gold square tube legs run under each top with a cross rail near the floor. The table is 1200 mm wide, 500 mm deep and 900 mm tall. A merchandising display table like this suits a boutique floor or a department store bay. The open frame keeps the floor visible under the stock. One merchandising display table holds 12 bags.

Top and Frame Build

Tops are 18 mm board with a white laminate face and a white edge band. The frame is 25 mm square steel tube with a polished gold plate. Each top fixes to its own leg pair, so the three sections stand as one unit. Load is 25 kg per top. Weight is 38 kg. Every merchandising display table is welded square before plating, so the three tops line up on one plane. Feet are adjustable through 20 mm.

Floor Placement

Set the table in a bay with 800 mm clear on the aisle side. Keep the back top near 900 mm, so a customer sees the hero piece first. Group by style across a top and by size down the steps. A merchandising display table also works for shoes or folded knitwear. Two tables make a low island. Compare retail displays floor pieces or countertop displays bench trays. A merchandising display table suits a 1.2 m bay.

Specification Detail
Dimensions 1200 x 500 x 900 mm
Tops 3, 18 mm board, white laminate
Step rise 150 mm between tops
Frame 25 mm steel, gold plate
Top load 25 kg each
Feet adjustable, 20 mm range
Weight 38 kg

Load and Balance

Each top takes 25 kg, which covers about 6 bags. Keep heavy pieces low and light pieces high. A merchandising display table at 38 kg stays stable, but an uneven load can rock on a soft floor. Set the feet flat before loading. Wipe the white tops with a damp cloth. Check the leg bolts each quarter. store operations teams restyle the three tops each week. A full merchandising display table shows 12 bags in three rows.

Delivery and Fit

The table ships in two cartons: tops and frames. One person builds it in about 25 minutes. Stand the three leg pairs, bolt the tops on, then set the feet. Weight is 38 kg. Build the highest section last, so the lower tops are in reach. Keep the parts wrapped until the frame is level. jewelry displays covers display pieces beside a stepped table.

Cost and Custom Build

Three stepped tops show a depth of stock without a tall fixture. Each top carries its own category, so a customer reads a range in one glance. Gold legs lift a white top. The open frame keeps a small bay light. Two tables make a low island. List price starts at USD 780 for the 1200 mm table. Ukiosks builds this merchandising display table in any width, step height and metal finish. Our team quotes from a floor plan. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Three Tier Merchandising Table with Gold Legs, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop