UniqueKiosk · Shenzhen workshop

Tee Post Clothing Rack with Plate Base

$215.00

Single post T stand clothing rack with a flat plate base and rail end stops. Price range: USD 215-320, set by rail length.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Central Post

One post carries this clothing rack from the plate to the rail at 1600 mm. A single post keeps the frame thin, so the stock stays the main shape. A shop places the unit beside a mirror and sees the garment from both sides. The post also takes a face out position, since nothing blocks the rail. Display racks list this single post.

t stand clothing rack

Rail End Stops

A small stop closes each end of the rail on this clothing rack. The stop keeps a hanger from sliding off when a shopper lifts the last piece. Each stop also holds the rail cap, so the end face stays closed. A shop hangs eight to twelve pieces on one rail. The rail turns in the tee, so staff set it square after a delivery. Retail displays fixtures share this stop.

clothing rack tee front

Plate Foot

A flat plate carries this clothing rack on the floor. The plate runs 550 mm long and 300 mm deep. This footprint gives the post a stable base without a wall strap. A shopper can pull a coat without tipping the unit. A shop sets shoes on the plate and keeps the rail for a feature piece. The plate also fits a narrow bay of 700 mm. Clothing racks list this plate foot.

clothing rack post side

Shop Placement

The clothing rack suits a small boutique, a denim window or a hotel lobby. A face out rack shows one look at a time, so a shop uses it for the hero piece. Staff rotate the rail of this clothing rack daily to keep the window fresh. The narrow plate lets two units sit inside a 1600 mm window bay. Countertop displays fit the same window.

Load And Care

The rail holds 45 kg when weight spreads along its length. Keep heavy coats near the post, since the rail bends at the far end. A loaded clothing rack stays level within 2 mm across the plate. Check the tee weld after a month, since a soft weld lets the rail tilt. Wipe the plate to keep the finish even. Read more about our bench on our tee fitting.

clothing rack tee joint

Rail Lengths

Rail length runs from 800 mm to 1200 mm on request. Height runs at 1500 mm or 1650 mm. A shop can add a second short rail at 900 mm for trousers. The plate can carry a low lip for a price card. The finish also comes in warm white or antique brass. List price starts at USD 215 for the 900 mm rail. ukiosks builds this clothing rack in Shenzhen to order, so send your rail length through contact us.

Specification Detail
Rail length 900 mm
Height 1600 mm
Post 30 mm square steel
Base plate 550 x 300 mm
Rail ends 2 stops
Load 45 kg
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Tee Post Clothing Rack with Plate Base”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop