UniqueKiosk · Shenzhen workshop
Steel Display Rack with Twin Shelf Plates
$246.00
Black steel display rack with two shelf plates and a solid base plate. Price range: USD 246-380, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Twin Shelf Plates
Two steel plates carry the stock on this display rack, one at 1500 mm and one at 1000 mm. Each plate runs 25 mm thick with a folded edge, so a row of boxes sits straight. A shop sets folded knitwear on the mid plate and a stock box above. The gap of 500 mm leaves room for a tall candle or a bag. Display racks list this plate build.
Solid Base Plate
A solid plate closes the floor line of this display rack. The plate runs 60 mm off the floor on four short feet, so a mop passes under the frame. A shop sets a shoe pair or a gift box on the base and keeps the upper plates for stock. The base plate also stops a rolling basket from hitting the posts. Retail displays fixtures share this base.
Post Frame
Four 25 mm square tube posts form the frame of this display rack. Two slim cross bars tie the posts at the back, so the rack stands square without a wall strap. A shop puts the unit against a wall or on an island floor. The open back lets light pass through the frame. Staff lift the rack by the top bar during a reset. Display shelves list this post frame.
Shop Fitting
The display rack suits a boutique corner, a gift shop bay or a hotel lobby. Three stock levels show a small range in one view. A shop pairs the unit with a low bench and a mirror. The 400 mm deep footprint of this display rack also fits a tight aisle beside a fitting room. Countertop displays fit the same bay.
Load And Care
Each shelf plate holds 40 kg and the base plate 50 kg on this display rack. Keep the heavy stock on the base, since the upper plate sits on a short weld. A loaded rack stays level within 2 mm across the four feet. Check the plate welds after a month, since a loose weld lets a plate dip. Wipe the plates and keep the steel dry. Read more about our bench on our plate work.
Size Options
Width runs from 800 mm to 1200 mm on request. Height runs at 1600 mm or 1800 mm. A shop can add a third plate at 300 mm for a low stock line. The plates can swap for a marble or an oak board. The finish also comes in chalk white or oxide grey. List price starts at USD 246 for the 900 mm rack. ukiosks builds this display rack in Shenzhen to order, so send your sizes through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1700 mm |
| Depth | 400 mm |
| Frame | 25 mm square steel |
| Plates | 2 shelves plus base |
| Load | 40 kg shelf, 50 kg base |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:
Bronze Single Rail Garment Rack, Three Shelves 2 m
Price:








Reviews
There are no reviews yet.