UniqueKiosk · Shenzhen workshop
Stainless Steel Display Rack with Brushed Back Panel
$936.00
Wall mounted stainless steel display rack with a brushed back panel and four shelf plates. Price range: USD 936-1480, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Brushed Panel Face
A brushed stainless panel closes the back of this display rack. The grain runs vertical, so a light streak reads as a clean line. A shop uses the panel as a mirror wall behind a perfume or watch row. The panel also hides a plaster wall and keeps the unit sealed at the top edge. This display rack ships as one piece with the cheeks already welded on. Display racks list this panel grain.
Four Plate Edges
Four plates run across this display rack, and each plate carries a thin edge lip. The lip stops a round bottle from rolling off the row. A shop sets the plates at 200 mm spacing for small goods and wider for tall bottles. The plates bolt to the back panel with two screws each. Display shelves share this plate lip.
Wall Mount Build
A wall bracket set carries this display rack, so the floor stays clear. The unit runs 300 mm deep and takes a 40 kg load per plate. A shop mounts the rack above a low unit and gains a second selling level. The back panel takes the bracket rail, so the plates keep their line. Wall mount fixtures list this bracket set.
Shop Use
The display rack suits a cosmetics bar, a watch counter or a hotel pantry. Stainless reads clean and takes a wipe, so a shop uses it in a wet zone. A shop mounts the unit at 900 mm from the floor and keeps 600 mm clear below. The brushed face also hides fingerprints better than a mirror finish. Retail displays fixtures fit the same bar.
Load And Care
Each plate holds 40 kg on this display rack, and the panel takes the full wall load. Keep the heavy stock on the low plate, since the bracket rail sits behind the top plate. A mounted unit stays level within 2 mm across the top edge. Check the wall bolts after a month, since a loose bolt lets the panel bow. Wipe the panel along the grain and keep it dry. Read more about our bench on our steel panels.
Size Options
Width runs from 1200 mm to 1800 mm on request. Height runs at 1200 mm or 1500 mm. A shop can order a glass plate in place of the steel on the top row. The panel comes in brushed, mirror or a black powder coat. A light bar can be added under each plate. List price starts at USD 936 for the 1200 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your wall size through contact us.
| Specification | Detail |
|---|---|
| Width | 1200 mm |
| Height | 1400 mm |
| Depth | 300 mm |
| Plates | 4 with edge lip |
| Panel | Brushed stainless |
| Load | 40 kg plate |
| Finish | Brushed stainless steel |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:
Bronze Single Rail Garment Rack, Three Shelves 2 m
Price:








Reviews
There are no reviews yet.