UniqueKiosk · Shenzhen workshop

Spiral Chrome Garment Rack with 38 Ball Stops 6 ft

$210.00

A chrome spiral clothing rack that shows garments on two rising arms. Holds dresses, scarves and long tops in a narrow footprint. Price range: USD 210-320, set by height and arm count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Rising Arms Save Floor

Corner space rarely suits a straight rail, so the spiral clothing rack lifts stock upward instead. Two helical arms wrap the centre pole and rise from 900 mm to 1800 mm. Each arm carries nineteen ball stops that keep hangers in place. Total hang length is 3.2 linear metres inside a 600 mm footprint. Shoppers walk around the pole and see every item. The open helix also lets air move, which helps in warm stores. Most shops fit a spiral clothing rack where a straight rail would block the aisle.

Chrome Pole and Ball Stops

The pole is 38 mm chrome plated steel with a 1.5 mm wall. Ball stops are turned from solid steel and welded, not glued. Each ball is 12 mm wide, so hangers rest between stops instead of sliding. The four-leg base spreads to 550 mm and carries four 50 mm casters. Welds are dressed before plating, which keeps the spiral clothing rack smooth to the touch. Shoppers compare this format with fixture ranges and with shelving systems when they plan a corner.

Height and Load Data

Overall height is 1830 mm, which clears most shop doorways when assembled flat. Each arm is rated for 15 kg, so the spiral clothing rack carries about 30 kg total. That equals twenty dresses or forty light blouses. The base plate is 3 mm steel, powder coated inside before chrome plating outside. Arms can be ordered in a single helix for narrow aisles, or in a double helix for full round display. A narrow spiral clothing rack also fits between two wall bays.

Specification Detail
Overall height 1830 mm
Arm span 600 mm footprint
Structure 38 mm chrome pole, two helical arms
Hanger stops 38 ball stops (19 per arm)
Load rating 15 kg per arm
Base Four-leg steel base with casters
Finish Polished or satin chrome, matte black

Merchandise That Fits

Dress shops hang long styles on the lower turn and short tops on the upper turn. A spiral clothing rack also serves as a fitting point at the end of a rail. Scarf and accessory sellers use the ball stops as hooks for straps. Bridal studios load veils on one arm and belts on the other. The spiral clothing rack also suits store display corners in small malls. Pair it with retail mannequins near the entrance for a full outfit story.

Finishes and Custom Work

Standard finish is polished chrome with a 0.8 micron layer. Satin chrome, matte black and brass tone are also available. Casters can be fixed or braked. A price card holder fits the pole top on request. Staff can spin the spiral clothing rack by hand, so no motor is needed. Working height stays low for restocking. List price starts at USD 210 for the 1830 mm double arm unit. Send your floor plan through our contact page and we will check the swing radius for the aisle. Matching chrome rails sit in retail store fixtures. ukiosks produces this spiral rack to order, so arm count, height and finish can follow your design.

Reviews

There are no reviews yet.

Be the first to review “Spiral Chrome Garment Rack with 38 Ball Stops 6 ft”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop