UniqueKiosk · Shenzhen workshop

Rung Ladder Boutique Clothing Rack

$195.00

Solid pine ladder clothing rack with six rungs and branch pegs, 1750 mm tall. Price range: USD 195-270, set by height and rung count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Ladder Frame

This clothing rack takes the form of a timber ladder with two slanted rails. Six rungs join the rails from the base to the crown. The frame stands 1750 mm high on a 550 mm base. It leans into a corner without a wall mount. A boutique uses the slant as a display angle for folded knitwear. The pale pine face keeps a light look on a dark floor. Display racks use the same ladder shape.

rung ladder clothing rack

Rungs And Pegs

Each rung measures 32 mm across and joins the rail with a cut tenon. Six short branch pegs sit on the outer rails and hold bags, belts or a hat. A shop drapes a scarf over a rung and hangs a jacket from a peg. The pine carries a clear matte coat that keeps the grain visible. A finished clothing rack weighs about 6 kg. Retail displays fixtures share this joint detail.

clothing rack ladder front

Boutique Styling

The rack works in a boutique corner, a denim wall, a kids section or a photo set. Staff hang three pieces per rung and keep the lower rungs for folded stock. A stylist uses the pegs for accessories. The narrow base fits a fitting room corner. A small floor gains a display wall without a fixture build. Countertop displays fit the same footprint.

clothing rack ladder side

Load And Lean

The frame carries about 35 kg when weight sits low on the rungs. Keep a heavy coat on a low rung, because a tall ladder tips at the crown. A loaded clothing rack stays steady on a flat floor with the base square. Check the feet after a move, since a soft floor lets the frame settle. Keep children off the upper rungs. Clothing racks list the same lean rule.

Clean And Finish

Wipe the pine with a dry cloth and use mild soap on a mark. A clear coated clothing rack keeps its pale tone under shop light. Keep water off the rung joints, since moisture swells a tenon. A ladder clothing rack also needs a dry room between seasons. Read more about our bench and the finish we use. Staff wipe the pegs weekly, since dust shows on pale wood.

clothing rack rung joint

Height And Rungs

Height runs from 1500 mm to 2000 mm on request. Rung count runs from five to eight. Pine is the standard timber, with oak or ash as an option. The clothing rack also takes a flat top board for a display shelf. List price starts at USD 195 for the 1750 mm unit. ukiosks builds this clothing rack in Shenzhen to your rung spacing, so send your plan through contact us.

Specification Detail
Frame Solid pine rails
Footprint 550 x 600 mm
Height 1750 mm
Rungs 6 cut tenon joints
Pegs 6 branch pegs
Load 35 kg
Weight 6 kg

Reviews

There are no reviews yet.

Be the first to review “Rung Ladder Boutique Clothing Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop