UniqueKiosk · Shenzhen workshop
Rivet Steel Display Rack with Seven Narrow Tiers
$362.00
Boltless rivet display rack in grey steel with seven narrow shelf tiers and back braces. Price range: USD 362-520, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Rivet Frame Build
A rivet frame carries this display rack, so no bolt or tool is needed on site. Each beam tab drops into an upright hole and locks on a rivet. A shop builds the unit in about 20 minutes with one person. The rivet joint also stays tight after a move, since the tab seats in the hole. This display rack suits a store that changes layout often. Display racks list this rivet joint.
Seven Narrow Tiers
Seven narrow tiers stack on this display rack, each 300 mm apart. The close spacing suits small packs, tins or boxed parts. A shop sets one sku per tier and reads the range down the face. The base tier of this display rack sits at floor level, so bulk stock loads without a lift truck. Retail displays fixtures share this tier pitch.
Back Cross Braces
A pair of cross braces ties the back of this display rack. The braces run corner to corner and stop the frame from swaying under load. A shop keeps the rack in a stock room and moves it with a pallet truck. The brace arms of this display rack also stiffen the unit on an uneven floor. Display shelves share this brace set.
Shop Use
The display rack suits a stock room, a back store or a small parts aisle. Seven tiers show a deep range in one narrow footprint. A shop sets the unit against a wall and keeps 700 mm clear in front. The grey finish of this display rack reads neutral, so the packs stay the focus. Countertop displays fit the same aisle.
Load And Care
Each tier holds 80 kg on this display rack, and the base tier holds 120 kg. Keep the heavy parts on the low tiers, since the rivet joint bears more load near the base. A loaded rack stays level within 2 mm across the floor plate. Check the rivet tabs after a month, since a loose tab lets a tier drop. Wipe the plates and keep the uprights dry. Read more about our bench on our rivet frames.
Size Options
Width runs from 900 mm to 1200 mm on request. Height runs at 1800 mm or 2100 mm. A shop can order five tiers instead of seven for taller stock. The plates come in grey or a galvanised finish. A castor set can replace the base feet. List price starts at USD 362 for the 900 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your tier plan through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1950 mm |
| Depth | 450 mm |
| Tiers | 7 at 300 mm pitch |
| Frame | Boltless rivet |
| Load | 80 kg tier, 120 kg base |
| Finish | Matte grey steel |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Oval Glass Display Counter, Gold Frame 1.2 m
Price:
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:








Reviews
There are no reviews yet.